From: Thomas Mittelstaedt <thomas.mittelsta...@de.bosch.com>
Signed-off-by: Thomas Mittelstaedt <thomas.mittelsta...@de.bosch.com>
---
doc/develop/uefi/u-boot_on_efi.rst | 76 ++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/doc/develop/uefi/u-boot_on_efi.rst
b/doc/develop/uefi/u-boot_on_efi.rst
index acad6397e8..927e1dc266 100644
--- a/doc/develop/uefi/u-boot_on_efi.rst
+++ b/doc/develop/uefi/u-boot_on_efi.rst
@@ -254,6 +254,82 @@ This shows running with serial enabled (see
`include/configs/efi-x86_app.h`)::
=> QEMU: Terminated
+Run at VirtualBox (x86)
+--------------------------
+
+Enable EFI
+~~~~~~~~~~~~
+At settings for virtual machine the flag at **System->Motherboard->Enable EFI
(special OSes only)** has to be enabled.
+
+Installation
+~~~~~~~~~~~~
+Install the needed system at a VDI disk and connect this to SATA controller
(type AHCI) at settings
+for virtual machine at **System->Storage->Controller:SATA**.
+
+For the following description 3 partitions are assumed:
+
+- Partition 1: formatted as **vfat**, used for U-Boot and and its environment
filesenvironment, flag **boot** set
+- Partition 2: formatted as **ext2/ext4**, used for Linux image and boot
configuration, flag **boot** set
+- Partition 3: formatted as **ext4**, used for root file system
+
+Create an extlinux.conf or a boot script
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Following files are assumed to be located at system for boot configuration::
+
+ Partition File Comment
+ 1 EFI/BOOT/BOOTX64.efi # renamed U-Boot EFI image
+ 2 Image # Linux image
+ 2 Initrd # Initramfs of Linux
+
+Boot script
+~~~~~~~~~~~
+
+The boot script **boot.scr** is assumed to be located at::
+
+ Partition File Comment
+ 2 boot.scr # Boot script, generated with mkimage from template
+
+Content of **boot.scr**:
+
+.. code-block:: bash
+
+ ext4load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r}
${prefix}Image
+ setenv kernel_size ${filesize}
+ ext4load ${devtype} ${devnum}:${distro_bootpart} ${ramdisk_addr_r}
${prefix}Initrd
+ setenv initrd_size ${filesize}
+ zboot ${kernel_addr_r} ${kernel_size} ${ramdisk_addr_r} ${initrd_size}
+
+Extlinux configuration
+~~~~~~~~~~~~~~~~~~~~~~
+
+Alternatively a configuration **extlinux.conf** can be used. **extlinux.conf**
is assumed to be located at::
+
+ Partition File Comment
+ 2 extlinux/extlinux.conf # Extlinux boot configuration
+
+Content of **extlinux.conf**:
+
+.. code-block:: bash
+
+ default l0
+ menu title U-Boot menu
+ prompt 0
+ timeout 50
+
+ label l0
+ menu label Linux
+ linux /Image
+ initrd /Initrd
+
+
+Additionally something like (sda is assumed as disk device):
+
+.. code-block:: bash
+
+ append root=/dev/sda3 console=tty0 console=ttyS0,115200n8 rootwait rw
+
+
Future work
-----------
--
2.30.2
