Dear Haiying Wang, In message <1297975097.1973.20.camel@haiying-laptop> you wrote: > > > Your scripts works fine. Now I only get one pair of diff which are > > System.map.mpc7448hpc2.diff u-boot.map.mpc7448hpc2.diff, because > > mpc7448hpc2 failed to build: > > " > > Configuring for mpc7448hpc2 board... > > cc1: error: AltiVec and E500 instructions cannot coexist > > cc1: error: AltiVec and E500 instructions cannot coexist > > lib/asm-offsets.c:1: error: AltiVec and E500 instructions cannot coexist > > make: *** [lib/asm-offsets.s] Error 1 > > make: *** Waiting for unfinished jobs....
You are using a broken or incorrectly configured (for the purpose) tool chain then. I don't see such problems with ELDK. > Sorry, I ignored some other info just now. Not only 7448 but also some > other boards failed to build, you can get the failed info from the > beforepatch.txt and afterpatch.txt I sent yesterday. The final result > should be: > > haiying@haiying-laptop:~/Opensource/Denx/u-boot$ ls -s *.diff > 0 System.map.ESTEEM192E.diff 0 System.map.P2020DS.diff > 0 System.map.ETX094.diff 0 System.map.sbc8641d.diff > 0 System.map.LANTEC.diff 0 System.map.SPD823TS.diff > 0 System.map.mpc7448hpc2.diff 0 System.map.xpedite517x.diff > 0 System.map.MPC8610HPCD.diff 0 u-boot.map.mpc7448hpc2.diff > 0 System.map.MPC8641HPCN_36BIT.diff 0 u-boot.map.MPC8610HPCD.diff > 0 System.map.MPC8641HPCN.diff 0 u-boot.map.MPC8641HPCN_36BIT.diff > 0 System.map.mpq101.diff 0 u-boot.map.MPC8641HPCN.diff > 0 System.map.P2020DS_36BIT.diff 0 u-boot.map.sbc8641d.diff > 0 System.map.P2020DS_DDR2.diff 0 u-boot.map.xpedite517x.diff > > The above boards failed to build thus the diff files were generated but the > contents are all 0. All these boards build fine for me. > All the other boards should not have difference in System.map/u-boot.map > before and after applying the LDFLAGS_FINAL patch. As it's mostly unmaintained and/or Freescale boards that are untested because of your tool chain issues I guess we can assume the test passed. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de To get something done, a committee should consist of no more than three men, two of them absent. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
