At present this leaves the stack at the pre-relocation value. This is not ideal since we want to have U-Boot running entirely from the top of memory.
In addition, the new global_data pointer is not actually used, since the global_data pointer itself is relocated, then the pre-relocation value is changed, so the effective value (after relocation) does not update. Adjust the implementation to follow the 32-bit code more closely, with a trampoline function which is passed the new stack and global_data pointer. This ensures that the correct values come through even when relocating. Signed-off-by: Simon Glass <s...@chromium.org> --- arch/x86/cpu/start64.S | 19 +++++++++++++++++++ arch/x86/include/asm/u-boot-x86.h | 11 +++++++++++ common/board_f.c | 12 +++++++----- 3 files changed, 37 insertions(+), 5 deletions(-) diff --git a/arch/x86/cpu/start64.S b/arch/x86/cpu/start64.S index 7be834788b9f..78e894d2a21a 100644 --- a/arch/x86/cpu/start64.S +++ b/arch/x86/cpu/start64.S @@ -26,3 +26,22 @@ _start: /* Should not return here */ jmp . + +.globl board_init_f_r_trampoline64 +.type board_init_f_r_trampoline64, @function +board_init_f_r_trampoline64: + /* + * SDRAM has been initialised, U-Boot code has been copied into + * RAM, BSS has been cleared and relocation adjustments have been + * made. It is now time to jump into the in-RAM copy of U-Boot + * + * %eax = Address of top of new stack + */ + + /* Stack grows down from top of SDRAM */ + movq %rsi, %rsp + + /* New gd is in rdi */ + + /* Re-enter U-Boot by calling board_init_f_r() */ + call board_init_f_r diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index 1610d7237bcd..3703094027d5 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -109,6 +109,17 @@ int fsp_save_s3_stack(void); */ void __noreturn board_init_f_r_trampoline(ulong sp); +/** + * board_init_f_r_trampoline64() - jump to relocated address with new stack + * + * This is the 64-bit version + * + * @new_gd: New global_data pointer to use + * @sp: New stack pointer to pass on to board_init_r() + */ +void __noreturn board_init_f_r_trampoline64(struct global_data *new_gd, + ulong sp); + void __noreturn board_init_f_r(void); int arch_misc_init(void); diff --git a/common/board_f.c b/common/board_f.c index f3c1ab53b1c6..f252a8eed5fd 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -731,8 +731,7 @@ static int fix_fdt(void) #endif /* ARM calls relocate_code from its crt0.S */ -#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ - !CONFIG_IS_ENABLED(X86_64) +#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) static int jump_to_copy(void) { @@ -754,7 +753,11 @@ static int jump_to_copy(void) * (CPU cache) */ arch_setup_gd(gd->new_gd); - board_init_f_r_trampoline(gd->start_addr_sp); +# if CONFIG_IS_ENABLED(X86_64) + board_init_f_r_trampoline64(gd->new_gd, gd->start_addr_sp); +# else + board_init_f_r_trampoline(gd->start_addr_sp); +# endif #else relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr); #endif @@ -969,8 +972,7 @@ static const init_fnc_t init_sequence_f[] = { * watchdog device is not serviced is as small as possible. */ cyclic_unregister_all, -#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ - !CONFIG_IS_ENABLED(X86_64) +#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) jump_to_copy, #endif NULL, -- 2.40.0.348.gf938b09366-goog