This series refreshes Colibri iMX8X support as follows: - enable fuse command - revert switch to binman - set boot delay - enable bootcount limit - move bootaux memory base and size configuration to defconfig - update env memory layout - use load instead of fatload in M4 boot environment helpers - provide proper prompt - drop obsolete environment variables - implement SoC variant handling - move SoC variant detection into its own function - update update_uboot confirmation message - remove obsolete SDHC related config defines - remove obsolete net usb start - enable OF_SYSTEM_SETUP for M4 memory reservation - introduce setup setting setupargs - add 2nd ethernet address
Andrejs Cainikovs (7): board: colibri-imx8x: add 2nd ethernet address colibri-imx8x: construct fdtfile dynamically colibri-imx8x: drop obsolete environment variables colibri-imx8x: switch from fatload to load colibri-imx8x: set bootaux memory base and size Revert "imx: imx8x: colibri: switch to binman" colibri-imx8x: enable fuse command Igor Opaniuk (1): colibri-imx8x: provide proper CONFIG_SYS_PROMPT Marcel Ziswiler (6): colibri-imx8x: remove obsolete net usb start colibri-imx8x: remove obsolete sdhc related config defines colibri-imx8x: update update_uboot confirmation message colibri-imx8x: update env memory layout colibri-imx8x: enable environment bootcount limit colibri-imx8x: set bootdelay Max Krummenacher (1): colibri-imx8x: extract is_imx8dx() from ram detection Philippe Schenker (2): colibri-imx8x: Remove baudrate from console argument defconfig: colibri-imx8x: enable CONFIG_OF_SYSTEM_SETUP arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 2 - arch/arm/mach-imx/imx8/Kconfig | 1 - board/toradex/colibri-imx8x/Kconfig | 3 + board/toradex/colibri-imx8x/colibri-imx8x.c | 36 ++++++--- configs/colibri-imx8x_defconfig | 13 +++- include/configs/colibri-imx8x.h | 78 ++++---------------- 6 files changed, 56 insertions(+), 77 deletions(-) -- 2.34.1
