U-Boot build process currently always produces broken u-boot-dtb.bin binary
for PowerPC mpc85xx architecture on boards which needs mpc85xx reset
vector. For these boards this (intermediate) binary is not used as input
for any other Makefile target on this architecture, so there is no real
problem with it.
But it is not a good idea to produce broken binaries during build phase. So
try to improve it. Binary u-boot-dtb.bin should contains u-boot code with
DTB blob. Such binary for those boards is build by binman. So change binman
output file name from u-boot.bin to u-boot-dtb.bin and then let generic
Makefile rule to generate final u-boot.bin from u-boot-dtb.bin. And finally
disable generic u-boot-dtb.bin rule for mpc85xx.
Signed-off-by: Pali Rohár <p...@kernel.org>
---
Makefile | 17 ++++++++---------
arch/powerpc/dts/socrates-u-boot.dtsi | 2 +-
arch/powerpc/dts/u-boot.dtsi | 2 +-
3 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/Makefile b/Makefile
index 5473bea25332..5d2ef8cc81c5 100644
--- a/Makefile
+++ b/Makefile
@@ -1195,30 +1195,29 @@ endif
u-boot.bin: u-boot-fit-dtb.bin FORCE
$(call if_changed,copy)
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
ifneq ($(CONFIG_TARGET_SOCRATES),y)
u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
$(call if_changed,cat)
endif
+endif
else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
+
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
ifneq ($(CONFIG_TARGET_SOCRATES),y)
u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
$(call if_changed,cat)
endif
+endif
-ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
-ifneq ($(CONFIG_TARGET_SOCRATES),y)
u-boot.bin: u-boot-dtb.bin FORCE
$(call if_changed,copy)
-endif
-endif
-else ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
-ifneq ($(CONFIG_TARGET_SOCRATES),y)
+else
u-boot.bin: u-boot-nodtb.bin FORCE
$(call if_changed,copy)
endif
-endif
# we call Makefile in arch/arm/mach-imx which
# has targets which are dependent on targets defined
@@ -1597,14 +1596,14 @@ u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp
u-boot.img FORCE
endif
ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
-u-boot.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
+u-boot-dtb.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
$(call if_changed,binman)
OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
u-boot-br.bin: u-boot FORCE
$(call if_changed,objcopy)
else ifeq ($(CONFIG_TARGET_SOCRATES),y)
-u-boot.bin: u-boot-nodtb.bin u-boot.dtb FORCE
+u-boot-dtb.bin: u-boot-nodtb.bin u-boot.dtb FORCE
$(call if_changed,binman)
endif
diff --git a/arch/powerpc/dts/socrates-u-boot.dtsi
b/arch/powerpc/dts/socrates-u-boot.dtsi
index b012201a32bd..f6af611b513c 100644
--- a/arch/powerpc/dts/socrates-u-boot.dtsi
+++ b/arch/powerpc/dts/socrates-u-boot.dtsi
@@ -5,7 +5,7 @@
*/
/ {
binman {
- filename = "u-boot.bin";
+ filename = "u-boot-dtb.bin";
pad-byte = <0xff>;
// Place dtb one sector before u-boot-nodtb.bin
blob {
diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi
index 6b7375cff215..c39ab6f0cacd 100644
--- a/arch/powerpc/dts/u-boot.dtsi
+++ b/arch/powerpc/dts/u-boot.dtsi
@@ -9,7 +9,7 @@
/ {
binman {
- filename = "u-boot.bin";
+ filename = "u-boot-dtb.bin";
skip-at-start = <CONFIG_TEXT_BASE>;
sort-by-offset;
pad-byte = <0xff>;
--
2.20.1
