On Wednesday 11 January 2023 19:02:38 Pali Rohár wrote:
> On Wednesday 11 January 2023 18:55:40 Pali Rohár wrote:
> > On Wednesday 11 January 2023 09:01:37 Tom Rini wrote:
> > > On Wed, Jan 11, 2023 at 01:52:24PM +0100, Heiko Schocher wrote:
> > > > Hello Pali, Tom,
> > > >
> > > > I just tried azure build with my socrates board updates based on
> > > > v2023.01 and the 2 patches from Pali:
> > > >
> > > > http://patchwork.ozlabs.org/project/uboot/patch/20221228200437.30971-1-p...@kernel.org/
> > > > http://patchwork.ozlabs.org/project/uboot/patch/20221228200437.30971-2-p...@kernel.org/
> >
> > At the time when I sent those two patches to ML, I checked that P1/P2
> > powerpc boards and also socrates board compiles successfully.
> >
> > Now I imported those two patches on top of the current master branch and
> > they still compiles without any problems for socrates board.
> >
> > > > and get errors for powerpc build:
> > > >
> > > > https://dev.azure.com/hs0298/110c3e42-44d5-4db4-9bd5-8a8bbead15f3/_apis/build/builds/93/logs/601
> > > >
> > > > socrates board builds fine ... my patches are socrates board specfic,
> > > > so hopefully no impact for other boards ...
> >
> > From that build log it looks like that u-boot fails for socrates and
> > kmcent2 board. Which is strange as you said that too that socrates is
> > building fine...
>
> kmcent2 is expected to fail with my above two patches on top of the
> v2023.01 without this kmcent2 commit which is now already in master:
> https://source.denx.de/u-boot/u-boot/-/commit/499fe577c8011dd8a9184548c419db42aef079a7
And now I think I see the reason why it is failing also for socrates
board. Error in the build log is:
2023-01-11T12:16:04.4937207Z +binman: [Errno 2] No such file or directory:
'u-boot.dtb'
2023-01-11T12:16:04.4937685Z +make[1]: *** [Makefile:1613: u-boot-dtb.bin]
Error 1
u-boot.dtb builds make by Makefile rule:
u-boot.dtb: dts/dt.dtb
$(call cmd,copy)
But socrates-u-boot.dtsi has specified that use dts/dt.dtb and this
dependency is also specified in Makefile.
And it looks like that binman needs also u-boot.dtb file. So it is
possible to hit a race condition, that make builds u-boot.dtb later than
rule for binman.
I would suggest to try to apply this patch, which should instruct make
to do not call binman until u-boot.dtb is correctly built:
diff --git a/Makefile b/Makefile
index 3c76486a620e..5d2ef8cc81c5 100644
--- a/Makefile
+++ b/Makefile
@@ -1603,7 +1603,7 @@ OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j
.resetvec
u-boot-br.bin: u-boot FORCE
$(call if_changed,objcopy)
else ifeq ($(CONFIG_TARGET_SOCRATES),y)
-u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+u-boot-dtb.bin: u-boot-nodtb.bin u-boot.dtb FORCE
$(call if_changed,binman)
endif
diff --git a/arch/powerpc/dts/socrates-u-boot.dtsi
b/arch/powerpc/dts/socrates-u-boot.dtsi
index ba2e56d35675..f6af611b513c 100644
--- a/arch/powerpc/dts/socrates-u-boot.dtsi
+++ b/arch/powerpc/dts/socrates-u-boot.dtsi
@@ -9,7 +9,7 @@
pad-byte = <0xff>;
// Place dtb one sector before u-boot-nodtb.bin
blob {
- filename = "dts/dt.dtb";
+ filename = "u-boot.dtb";
};
u-boot-nodtb {
filename = "u-boot-nodtb.bin";
Heiko, could you try to put commit 499fe577c8011dd8a9184548c419db42aef079a7
and above patch to your branch and retest it again?
> > > socrates is one of the two failing boards, in that link:
> > > 2023-01-11T12:16:04.4930367Z powerpc: w+ MPC837XERDB kmcoge5ne
> > > kmeter1 kmopti2 kmsupx5 kmtepr2 tuge1 tuxx1 MPC8548CDS MPC8548CDS_36BIT
> > > MPC8548CDS_legacy P1010RDB-PA_36BIT_NAND P1010RDB-PA_36BIT_NOR
> > > P1010RDB-PA_36BIT_SDCARD P1010RDB-PA_36BIT_SPIFLASH P1010RDB-PA_NAND
> > > P1010RDB-PA_NOR P1010RDB-PA_SDCARD P1010RDB-PA_SPIFLASH
> > > P1010RDB-PB_36BIT_NAND P1010RDB-PB_36BIT_NOR P1010RDB-PB_36BIT_SDCARD
> > > P1010RDB-PB_36BIT_SPIFLASH P1010RDB-PB_NAND P1010RDB-PB_NOR
> > > P1010RDB-PB_SDCARD P1010RDB-PB_SPIFLASH P1020RDB-PC P1020RDB-PC_36BIT
> > > P1020RDB-PC_36BIT_NAND P1020RDB-PC_36BIT_SDCARD
> > > P1020RDB-PC_36BIT_SPIFLASH P1020RDB-PC_NAND P1020RDB-PC_SDCARD
> > > P1020RDB-PC_SPIFLASH P1020RDB-PD P1020RDB-PD_NAND P1020RDB-PD_SDCARD
> > > P1020RDB-PD_SPIFLASH P2020RDB-PC P2020RDB-PC_36BIT
> > > P2020RDB-PC_36BIT_NAND P2020RDB-PC_36BIT_SDCARD
> > > P2020RDB-PC_36BIT_SPIFLASH P2020RDB-PC_NAND P2020RDB-PC_SDCARD
> > > P2020RDB-PC_SPIFLASH P2041RDB P2041RDB_NAND P2041RDB_SDCARD
> > > P2041RDB_SPIFLASH T1024RDB T1024RDB_NAND T1024RDB_SDCARD
> > > T1024RDB_SPIFLASH T1042D4RDB T1042D4RDB_NAND T1042D4RDB_SDCARD
> > > T1042D4RDB_SPIFLASH T2080QDS T2080QDS_NAND T2080QDS_SDCARD
> > > T2080QDS_SECURE_BOOT T2080QDS_SPIFLASH T2080QDS_SRIO_PCIE_BOOT T2080RDB
> > > T2080RDB_NAND T2080RDB_revD T2080RDB_revD_NAND T2080RDB_revD_SDCARD
> > > T2080RDB_revD_SPIFLASH T2080RDB_SDCARD T2080RDB_SPIFLASH T4240RDB
> > > T4240RDB_SDCARD + socrates kmcent2
> > >
> > > > @Tom: Do you know if v2023.01 builds fine for powerpc
> > >
> > > Yes, CI is passing.
> > >
> > > --
> > > Tom
> >
> >
