Dear Daniel Gorsulowski, > Hello Albert, > > Albert ARIBAUD wrote: >> Le 18/01/2011 10:27, Daniel Gorsulowski a écrit : >>> Hello again! >> >> Hi Daniel, >> >>> One month ago, I asked you for help (see message below), but got no >>> answer. >> >> Sorry about that. Last quarter of 2010 was rather busy for me. >> >>> Do you see any chance, to fix the at91 tree? >>> >>> There is no way to fix my boards, as long as all at91 builds have >>> fundamental problems. >>> >>> I found a patch series from Alexander Stein, but it seems, this series >>> does not go mainline: >>> http://lists.denx.de/pipermail/u-boot/2010-November/080885.html >>> Should I ask Alexander for resend his pathes? >>> >>> Regards >>> Daniel >> >> Reinhard (Cc:) has lots of fixes in his u-boot-atmel tree; you should try >> its master branch. I'm leaving below your (unanswered, apologies again) >> questions for Reinhard to answer. >> >> Regards, >> Albert. > > Thanks for your response! > I tried Reinhards master branch, but build throws same errors as shown > below. It seems, among other things the atmel usart driver needs an > update to new SoC access. Alexander Steins patch series seems to add this > support. > > I'll wait for a fix until I send patches for my boards.
1. Please send always the mailing list, too! 2. Use the rework101229 branch (minus the last 5 patches). There is lot of cleanup done in the header files and the ATMEL drivers. The at91sam9260(9xe)ek board builds fine and works. Use that as a template or reference what to do. You should *only* need to adapt board/*/files and your configs/<board>.h files. And of course updated entries in boards.cfg. Once the rework is done for *almost* *ALL* AT91 SoCs it will be put for review into mainline, probably for the 06.2011 U-Boot. Best Regards, Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot