HI Fabrice On 12/12/22 11:44, Fabrice Gasnier wrote: > Activate the USB onboard HUB driver, that is used to enable the HUB supply > on STM32MP15 EVAL, DK1 and DK2 boards. > This avoids marking the 3v3 corresponding regulator as always-on. > > Signed-off-by: Fabrice Gasnier <fabrice.gasn...@foss.st.com> > --- > > configs/stm32mp15_basic_defconfig | 1 + > configs/stm32mp15_defconfig | 1 + > configs/stm32mp15_trusted_defconfig | 1 + > 3 files changed, 3 insertions(+) > > diff --git a/configs/stm32mp15_basic_defconfig > b/configs/stm32mp15_basic_defconfig > index 86ebbef0a6c8..4d2ac589931a 100644 > --- a/configs/stm32mp15_basic_defconfig > +++ b/configs/stm32mp15_basic_defconfig > @@ -164,6 +164,7 @@ CONFIG_USB=y > CONFIG_DM_USB_GADGET=y > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_ONBOARD_HUB=y > CONFIG_USB_GADGET=y > CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics" > CONFIG_USB_GADGET_VENDOR_NUM=0x0483 > diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig > index caa79e68834f..ccf65dd12223 100644 > --- a/configs/stm32mp15_defconfig > +++ b/configs/stm32mp15_defconfig > @@ -140,6 +140,7 @@ CONFIG_USB=y > CONFIG_DM_USB_GADGET=y > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_ONBOARD_HUB=y > CONFIG_USB_GADGET=y > CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics" > CONFIG_USB_GADGET_VENDOR_NUM=0x0483 > diff --git a/configs/stm32mp15_trusted_defconfig > b/configs/stm32mp15_trusted_defconfig > index 3309c2e79246..a553038a42c5 100644 > --- a/configs/stm32mp15_trusted_defconfig > +++ b/configs/stm32mp15_trusted_defconfig > @@ -140,6 +140,7 @@ CONFIG_USB=y > CONFIG_DM_USB_GADGET=y > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_ONBOARD_HUB=y > CONFIG_USB_GADGET=y > CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics" > CONFIG_USB_GADGET_VENDOR_NUM=0x0483
Applied on u-boot-stm32/master Thanks
