On 01/04/2011 09:27 AM, Jason Liu wrote: > Add initial support for MX53EVK board support. > FEC, SD/MMC, UART, I2C, have been supported. > > Signed-off-by: Jason Liu <r64...@freescale.com> > > --- > Changes for v2: > -Address the comments from Stefano, Albert and Wolfgang, > -remove the ivt.S file and use imximage.cfg instead, > -remove the ivt link to u-boot > -Address the comments from Stefano, > -Correct the copyright issue, > -Use mxc_get_gpio() and mxc_set_gpio() accessors. > -Get rid of system_rev, > -use i2c enumeration value (0,1,..N) instead of BASE address, > -use fsl_pmic i2c interface, > -Add comments for why manage the pmic in a different way for TO2 > -Remove the comments from configs/mx53evk.h, > - /* > - * Disabled for now due to build problems under Debian and a > significant > - * increase in the final file size: 144260 vs. 109536 Bytes. > - */ > -Address the comments from Wolfgang, > -Move CONFIG_SYS_TEXT_BASE to board config file, > -Remove the comments from configs/mx53evk.h > - /* size in bytes reserved for initial data */ > #define BOARD_LATE_INIT > -Change the comments, * Hardware drivers to * UART drivers > Changes for v3: > - Address the comments from Stefano, > - put uart and fec iomux setting to board_early_init_f so that uart can > print > out the early information such as uboot banner and cpuinfo etc. > - Put maintainer name to ARM list, > - Use Macro instead of constant value for PMIC, > - Remove CONFIG_I2C_MXC and BOARD_LATE_INIT, > - Add config.mk and imximage.cfg files to this patch, > > Changes for v4: > - Address the comments from Stefano, > - Maintain the list *alfabetically* sorted of MAINTAINERS > - Multiline comment issue in configs/mx53evk.h file. > --- > MAINTAINERS | 4 + > board/freescale/mx53evk/Makefile | 48 ++++ > board/freescale/mx53evk/config.mk | 25 +++ > board/freescale/mx53evk/imximage.cfg | 112 ++++++++++ > board/freescale/mx53evk/mx53evk.c | 397 > ++++++++++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/mx53evk.h | 193 +++++++++++++++++ > include/mc13892.h | 5 + > 8 files changed, 785 insertions(+), 0 deletions(-)
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
