On Jan 9, 2011, at 3:16 PM, Kumar Gala wrote: > Moved the SRIO init out of corenet_ds and into common code for > 8xxx/QorIQ processors that have SRIO. We mimic what we do with PCIe > controllers for SRIO. > > We utilize the fact that SRIO is over serdes to determine if its > configured or not and thus can setup the LAWs needed for it dynamically. > > We additionally update the device tree (to remove the SRIO nodes) if the > board doesn't have SRIO enabled. > > Introduced the following standard defines for board config.h: > > CONFIG_SYS_HAS_SRIO - Chip has SRIO or not > CONFIG_SRIO1 - Board has SRIO 1 port available > CONFIG_SRIO2 - Board has SRIO 2 port available > > (where 'n' is the port #) > CONFIG_SYS_SRIOn_MEM_VIRT - virtual address in u-boot > CONFIG_SYS_SRIOn_MEM_PHYS - physical address (for law setup) > CONFIG_SYS_SRIOn_MEM_SIZE - size of window (for law setup) > > [ These mimic what we have for PCI and PCIe controllers ] > > Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> > --- > * Removed ifdef protection around externs per Sergei
applied to 85xx - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
