A late ack is currently being sent at the end of a transfer due to
incorrect logic in mchp_corei2c_empty_rx(). Currently the Assert Ack
bit is being written to the controller's control reg after the last
byte has been received, causing it to sent another byte with the ack.
Instead, the AA flag should be written to the control register when
the penultimate byte is read so it is sent out for the last byte.

Reported-by: Andreas Buerkler <andreas.buerk...@enclustra.com>
Fixes: 0dc0d1e094 ("i2c: Add Microchip PolarFire SoC I2C driver")
Fixes: 0190d48488 ("i2c: microchip: fix ack sending logic")
Signed-off-by: Conor Dooley <conor.doo...@microchip.com>
---
 drivers/i2c/i2c-microchip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/i2c-microchip.c b/drivers/i2c/i2c-microchip.c
index 3a27459386..d82b80f535 100644
--- a/drivers/i2c/i2c-microchip.c
+++ b/drivers/i2c/i2c-microchip.c
@@ -224,7 +224,7 @@ static void mpfs_i2c_empty_rx(struct mpfs_i2c_bus *bus)
                bus->msg_len--;
        }
 
-       if (bus->msg_len == 0) {
+       if (bus->msg_len <= 1) {
                ctrl = readl(bus->base + MPFS_I2C_CTRL);
                ctrl &= ~CTRL_AA;
                writel(ctrl, bus->base + MPFS_I2C_CTRL);
-- 
2.38.0

Reply via email to