Hi Svyatoslav, On Mon, 24 Oct 2022 at 00:26, Svyatoslav Ryhel <clamo...@gmail.com> wrote: > > Add timer support for T20/T30/T114 and T124 based devices. > Driver is based on DM, has device tree support and can be > used on SPL and early boot stage. > > Tested-by: Andreas Westman Dorcsak <hed...@yahoo.com> # ASUS TF600T T30 > Tested-by: Jonas Schwöbel <jonasschwoe...@yahoo.de> # Surface RT T30 > Tested-by: Robert Eckelmann <longnose...@gmail.com> # ASUS TF101 T20 > Tested-by: Svyatoslav Ryhel <clamo...@gmail.com> # LG P895 T30 > Co-developed-by: Jonas Schwöbel <jonasschwoe...@yahoo.de> > Signed-off-by: Jonas Schwöbel <jonasschwoe...@yahoo.de> > Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com> > --- > drivers/timer/Kconfig | 8 +++ > drivers/timer/Makefile | 1 + > drivers/timer/tegra-timer.c | 124 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 133 insertions(+) > create mode 100644 drivers/timer/tegra-timer.c > > diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig > index fd8745ffc2..702ffd3084 100644 > --- a/drivers/timer/Kconfig > +++ b/drivers/timer/Kconfig > @@ -244,6 +244,14 @@ config STM32_TIMER > Select this to enable support for the timer found on > STM32 devices. > > +config TEGRA_TIMER > + bool "Tegra timer support" > + depends on TIMER > + select TIMER_EARLY > + help > + Select this to enable support for the timer found on > + Tegra devices. > + > config X86_TSC_TIMER > bool "x86 Time-Stamp Counter (TSC) timer support" > depends on TIMER && X86 > diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile > index 7bfb7749e9..ccbff05d43 100644 > --- a/drivers/timer/Makefile > +++ b/drivers/timer/Makefile > @@ -26,6 +26,7 @@ obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o > obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint_timer.o > obj-$(CONFIG_STI_TIMER) += sti-timer.o > obj-$(CONFIG_STM32_TIMER) += stm32_timer.o > +obj-$(CONFIG_TEGRA_TIMER) += tegra-timer.o > obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o > obj-$(CONFIG_MTK_TIMER) += mtk_timer.o > obj-$(CONFIG_MCHP_PIT64B_TIMER) += mchp-pit64b-timer.o > diff --git a/drivers/timer/tegra-timer.c b/drivers/timer/tegra-timer.c > new file mode 100644 > index 0000000000..cda460921f > --- /dev/null > +++ b/drivers/timer/tegra-timer.c > @@ -0,0 +1,124 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2022 Svyatoslav Ryhel <clamo...@gmail.com> > + */ > + > +#include <common.h> > +#include <dm.h> > +#include <errno.h> > +#include <timer.h> > + > +#include <asm/io.h> > +#include <asm/arch/clock.h> > +#include <asm/arch/tegra.h> > + > +#define TEGRA_OSC_CLK_ENB_L_SET (NV_PA_CLK_RST_BASE + 0x320) > +#define TEGRA_OSC_SET_CLK_ENB_TMR BIT(5) > + > +#define TEGRA_TIMER_USEC_CNTR (NV_PA_TMRUS_BASE + 0) > +#define TEGRA_TIMER_USEC_CFG (NV_PA_TMRUS_BASE + 4) > + > +#define TEGRA_TIMER_RATE 1000000 /* 1 MHz */ > + > +u64 notrace timer_early_get_count(void) > +{ > + /* At this stage raw timer is used */ > + return readl(TEGRA_TIMER_USEC_CNTR); > +} > + > +unsigned long notrace timer_early_get_rate(void) > +{ > + return TEGRA_TIMER_RATE; > +} > + > +#if CONFIG_IS_ENABLED(BOOTSTAGE) > +ulong timer_get_boot_us(void) > +{ > + u64 ticks = 0; > + int ret; > + > + ret = dm_timer_init();
You cannot necessarily call this here...does it work when bootstage is enabled? Regards, Simon