Hi Mayuresh,
On Thu, 29 Sept 2022 at 03:57, Mayuresh Chitale
<mchit...@ventanamicro.com> wrote:
>
> Add spl_nvme to read a fat partition from a bootable NVMe device.
>
> Signed-off-by: Mayuresh Chitale <mchit...@ventanamicro.com>
> ---
> arch/riscv/include/asm/spl.h | 1 +
> common/spl/Makefile | 1 +
> common/spl/spl_nvme.c | 44 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 46 insertions(+)
> create mode 100644 common/spl/spl_nvme.c
Reviewed-by: Simon Glass <s...@chromium.org>
(but see below)
>
> diff --git a/arch/riscv/include/asm/spl.h b/arch/riscv/include/asm/spl.h
> index e8a94fcb1f..5d0ba4b034 100644
> --- a/arch/riscv/include/asm/spl.h
> +++ b/arch/riscv/include/asm/spl.h
> @@ -20,6 +20,7 @@ enum {
> BOOT_DEVICE_SPI,
> BOOT_DEVICE_USB,
> BOOT_DEVICE_SATA,
> + BOOT_DEVICE_NVME,
> BOOT_DEVICE_I2C,
> BOOT_DEVICE_BOARD,
> BOOT_DEVICE_DFU,
> diff --git a/common/spl/Makefile b/common/spl/Makefile
> index 13db3df993..4bcc3d7e68 100644
> --- a/common/spl/Makefile
> +++ b/common/spl/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
> obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
> obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o
> obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o
> +obj-$(CONFIG_$(SPL_TPL_)NVME) += spl_nvme.o
> obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += spl_semihosting.o
> obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
> obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
> diff --git a/common/spl/spl_nvme.c b/common/spl/spl_nvme.c
> new file mode 100644
> index 0000000000..d8a9dba845
> --- /dev/null
> +++ b/common/spl/spl_nvme.c
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2022
> + * Ventana Micro Systems Inc.
> + *
> + * Derived work from spl_sata.c
> + */
> +
> +#include <common.h>
> +#include <spl.h>
> +#include <errno.h>
> +#include <fat.h>
> +#include <nvme.h>
> +#include <init.h>
Should go above nvme.h
> +
> +static int spl_nvme_load_image(struct spl_image_info *spl_image,
> + struct spl_boot_device *bootdev)
> +{
> + int ret;
> + struct blk_desc *blk_desc;
> +
> + ret = pci_init();
> + if (ret < 0)
> + goto out;
> +
> + ret = nvme_scan_namespace();
> + if (ret < 0)
> + goto out;
> +
> + blk_show_device(IF_TYPE_NVME, CONFIG_SPL_NVME_BOOT_DEVICE);
> + blk_desc = blk_get_devnum_by_type(IF_TYPE_NVME,
> + CONFIG_SPL_NVME_BOOT_DEVICE);
I think we need to move this to device tree, but it is OK for now.
> + if (IS_ENABLED(CONFIG_SPL_FS_FAT))
> + ret = spl_load_image_fat(spl_image, bootdev, blk_desc,
> + CONFIG_SYS_NVME_FAT_BOOT_PARTITION,
> + CONFIG_SPL_PAYLOAD);
> + else
> + ret = -ENOSYS;
> +
> +out:
> + return ret;
> +}
> +
> +SPL_LOAD_IMAGE_METHOD("NVME", 0, BOOT_DEVICE_NVME, spl_nvme_load_image);
> --
> 2.25.1
>
Regards,
Simon
