[PATCH 2/4] clk-imx8mm: Move CLK_ENET_AXI to the non-SPL section

[Fabio Estevam]

Ethernet is not used inside SPL, so move the IMX8MM_CLK_ENET_AXI clock
inside the non-SPL block to reduce the final SPL binary size.

Signed-off-by: Fabio Estevam <feste...@denx.de>
---
 drivers/clk/imx/clk-imx8mm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 0d7891f11a..286915982c 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -28,10 +28,10 @@ static const char *imx8mm_a53_sels[] = {"clock-osc-24m", 
"arm_pll_out", "sys_pll
 static const char *imx8mm_ahb_sels[] = {"clock-osc-24m", "sys_pll1_133m", 
"sys_pll1_800m", "sys_pll1_400m",
                                        "sys_pll2_125m", "sys_pll3_out", 
"audio_pll1_out", "video_pll1_out", };
 
+#ifndef CONFIG_SPL_BUILD
 static const char *imx8mm_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_266m", 
"sys_pll1_800m", "sys_pll2_250m",
                                             "sys_pll2_200m", "audio_pll1_out", 
"video_pll1_out", "sys_pll3_out", };
 
-#ifndef CONFIG_SPL_BUILD
 static const char *imx8mm_enet_ref_sels[] = {"clock-osc-24m", "sys_pll2_125m", 
"sys_pll2_50m", "sys_pll2_100m",
                                             "sys_pll1_160m", "audio_pll1_out", 
"video_pll1_out", "clk_ext4", };
 
@@ -244,9 +244,6 @@ static int imx8mm_clk_probe(struct udevice *dev)
        clk_dm(IMX8MM_CLK_IPG_ROOT,
               imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1));
 
-       clk_dm(IMX8MM_CLK_ENET_AXI,
-              imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels,
-                                  base + 0x8880));
        clk_dm(IMX8MM_CLK_NAND_USDHC_BUS,
               imx8m_clk_composite_critical("nand_usdhc_bus",
                                            imx8mm_nand_usdhc_sels,
@@ -322,6 +319,9 @@ static int imx8mm_clk_probe(struct udevice *dev)
 
        /* clks not needed in SPL stage */
 #ifndef CONFIG_SPL_BUILD
+       clk_dm(IMX8MM_CLK_ENET_AXI,
+              imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels,
+                                  base + 0x8880));
        clk_dm(IMX8MM_CLK_ENET_REF,
               imx8m_clk_composite("enet_ref", imx8mm_enet_ref_sels,
               base + 0xa980));
-- 
2.25.1