These patches are based on Marvell's bootloader for the AlleyCat5/5X which was based on u-boot 2018.03. I've split that code into consumable chunks and dropped as much unnecessary stuff as I can. I've also tried to sync the device trees as much as possible with the support that will land in Linux 6.0 although there are still some differences
Changes in v4: - Collect r-by from Stefan - Remove unused mvebu_get_nand_clock() (will return in a later series) - Remove unnecessary #ifdefs - Misc style cleanups - Replace CONFIG_MVEBU_SAR with simpler code implemented directly in soc.c based around get_sar_freq which the 32-bit platforms already use. - Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to the defconfig. - Remove CONFIG_BAUDRATE as this is already set in the default config - Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with DM_USB - Remove CONFIG_PREBOOT as we don't have anything to run - Remove commented out CONFIG_BOARD_EARLY_INIT_R - Remove DEBUG_UART configuration - Remove unnecessary console environment variable - Remove CONFIG_MVEBU_SAR Changes in v3: - Remove unnecessary changes to RX descriptor handling - Use dev_get_dma_range() to parse dma-ranges property from parent device. - Remove unnecessary dma-ranges property from ethernet nodes (mvneta now correctly parses the property from the parent node). - Keep soc_print_clock_info and soc_print_device_info local to alleycat5. - Remove MMC and UBIFS distroboot options (MMC driver is not currently functional, NAND is not populated on the RD-AC5X board) - Remove unnecessary Ethernet configuration - Remove unnecessary NAND configuration - Remove memory node from dts so the value passed by the DDR FW will be used Changes in v2: - Use distro boot by default - remove unnecessary SPI-NOR partitions Chris Packham (5): net: mvneta: Add support for AlleyCat5 usb: ehci: ehci-marvell: Support for marvell,ac5-ehci pinctrl: mvebu: Add AlleyCat5 support arm: mvebu: Support for 98DX25xx/98DX35xx SoC arm: mvebu: Add RD-AC5X board arch/arm/dts/Makefile | 3 +- arch/arm/dts/ac5-98dx25xx.dtsi | 277 +++++++++++++++++++ arch/arm/dts/ac5-98dx35xx-rd.dts | 129 +++++++++ arch/arm/dts/ac5-98dx35xx.dtsi | 17 ++ arch/arm/mach-mvebu/Kconfig | 13 +- arch/arm/mach-mvebu/Makefile | 1 + arch/arm/mach-mvebu/alleycat5/Makefile | 8 + arch/arm/mach-mvebu/alleycat5/cpu.c | 124 +++++++++ arch/arm/mach-mvebu/alleycat5/soc.c | 298 +++++++++++++++++++++ arch/arm/mach-mvebu/alleycat5/soc.h | 7 + arch/arm/mach-mvebu/arm64-common.c | 5 + arch/arm/mach-mvebu/include/mach/cpu.h | 4 + board/Marvell/mvebu_alleycat-5/MAINTAINERS | 6 + board/Marvell/mvebu_alleycat-5/Makefile | 3 + board/Marvell/mvebu_alleycat-5/board.c | 28 ++ configs/mvebu_ac5_rd_defconfig | 84 ++++++ drivers/net/Kconfig | 2 +- drivers/net/mvneta.c | 43 ++- drivers/pinctrl/mvebu/Kconfig | 2 +- drivers/usb/host/Kconfig | 1 + drivers/usb/host/ehci-marvell.c | 57 +++- include/configs/mvebu_alleycat-5.h | 42 +++ 22 files changed, 1139 insertions(+), 15 deletions(-) create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.h create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile create mode 100644 board/Marvell/mvebu_alleycat-5/board.c create mode 100644 configs/mvebu_ac5_rd_defconfig create mode 100644 include/configs/mvebu_alleycat-5.h -- 2.37.3
