Hello! Now I have tested this patch series on Turris Omnia - A385, loaded via UART kwboot and seems that everything is working fine.
On Thursday 15 September 2022 16:20:35 Stefan Roese wrote: > This patchset enhaces the recently added Orion Timer driver to support > all other Kirkwood & 32bit MVEBU Armada platforms. Additionally, this > timer support is then enabled per default for those platforms, so that > the board config files don't need to be changed. Also necessary is > some dts hacking, so that the timer DT node is available in early > U-Boot stages. > > I've successfully tested this patchset on an Armada XP board. Additional > test on other boards and platforms are very welcome and necessary. > > Thanks, > Stefan > > Stefan Roese (8): > timer: orion-timer: Use timer_conv_64() to fix timer wrap around > timer: orion-timer: Add support for other Armada SoC's > timer: orion-timer: Add timer_get_boot_us() for BOOTSTAGE support > arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms > arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step > arm: mvebu: dts: armada-375.dtsi: Add timer0 & timer1 > arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot,dm-pre-reloc" to timer > DT node > kirkwood: lsxl: Sync defconfigs > > arch/arm/Kconfig | 4 + > arch/arm/dts/Makefile | 6 +- > arch/arm/dts/armada-375.dtsi | 4 +- > arch/arm/dts/mvebu-u-boot.dtsi | 11 +++ > arch/arm/mach-mvebu/include/mach/config.h | 5 -- > configs/lschlv2_defconfig | 2 - > configs/lsxhl_defconfig | 2 - > drivers/timer/Kconfig | 5 +- > drivers/timer/orion-timer.c | 103 +++++++++++++++++++--- > 9 files changed, 118 insertions(+), 24 deletions(-) > > -- > 2.37.3 >
