This patchset enhaces the recently added Orion Timer driver to support
all other Kirkwood & 32bit MVEBU Armada platforms. Additionally, this
timer support is then enabled per default for those platforms, so that
the board config files don't need to be changed. Also necessary is
some dts hacking, so that the timer DT node is available in early
U-Boot stages.
I've successfully tested this patchset on an Armada XP board. Additional
test on other boards and platforms are very welcome and necessary.
Thanks,
Stefan
Stefan Roese (8):
timer: orion-timer: Use timer_conv_64() to fix timer wrap around
timer: orion-timer: Add support for other Armada SoC's
timer: orion-timer: Add timer_get_boot_us() for BOOTSTAGE support
arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms
arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step
arm: mvebu: dts: armada-375.dtsi: Add timer0 & timer1
arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot,dm-pre-reloc" to timer
DT node
kirkwood: lsxl: Sync defconfigs
arch/arm/Kconfig | 4 +
arch/arm/dts/Makefile | 6 +-
arch/arm/dts/armada-375.dtsi | 4 +-
arch/arm/dts/mvebu-u-boot.dtsi | 11 +++
arch/arm/mach-mvebu/include/mach/config.h | 5 --
configs/lschlv2_defconfig | 2 -
configs/lsxhl_defconfig | 2 -
drivers/timer/Kconfig | 5 +-
drivers/timer/orion-timer.c | 103 +++++++++++++++++++---
9 files changed, 118 insertions(+), 24 deletions(-)
--
2.37.3
