On Fri, Aug 12, 2022 at 07:02:17PM +0800, Weijie Gao wrote:
> On Tue, 2022-08-09 at 11:10 +0200, Daniel Golle wrote:
> > Hi Weijie,
> >
> > On Thu, Aug 04, 2022 at 11:35:03AM +0800, Weijie Gao wrote:
> > > This patch adds general board files based on MT7986 SoCs.
> > >
> > > The SD/eMMC controller on MT7986A and MT7986B have different pin
> > > configurations so that four different reference board configs has
> > > to be
> > > added.
> > >
> > > Signed-off-by: Weijie Gao <weijie....@mediatek.com>
> > > ---
> > > [...]
> > > diff --git a/include/configs/mt7986.h b/include/configs/mt7986.h
> > > new file mode 100644
> > > index 0000000000..b28fc0f613
> > > --- /dev/null
> > > +++ b/include/configs/mt7986.h
> > > @@ -0,0 +1,26 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +/*
> > > + * Configuration for MediaTek MT7986 SoC
> > > + *
> > > + * Copyright (C) 2022 MediaTek Inc.
> > > + * Author: Sam Shih <sam.s...@mediatek.com>
> > > + */
> > > +
> > > +#ifndef __MT7986_H
> > > +#define __MT7986_H
> > > +
> > > +#include <linux/sizes.h>
> > > +
> >
> > In the SDK sources I found also
> > #define CONFIG_SYS_BOOTM_LEN SZ_128M
> > here which is actually needed to boot any image with uncompressed
> > kernel larger than 8MiB. As for ARM64 this size is easily exceeded
> > and
> > we got plenty of RAM, I suggest to also include a more generous
> > CONFIG_SYS_BOOTM_LEN in your submission to upstream U-Boot.
>
> CONFIG_SYS_BOOTM_LEN is now a Kconfig symbol. It will no be defined in
> this header.
> Instead, the default value of this symbol is 0x4000000 (64M) for ARM64
> which is enough for an ARM64 kernel.
Sorry, I missed c45568cc4e ("Convert CONFIG_SYS_BOOTM_LEN to Kconfig")
and was trying the series on top of U-Boot 2022.07 (for inclusion in
OpenWrt) locally.
I've tested the whole series with Bananapi BPi-R3 (MT7986A) board.
U-Boot itself works great with all 4 boot media options.
The only remaining problem is BootROM header generation using
mkimage/mtk_image for SPI-NOR:
TF-A and U-Boot ithemselves both work well with SPI-NOR when using
'bromutil' to generate the image. When using 'mkimage -T mtk_image'
instead of 'bromutil' the resulting bl2.img doesn't work:
F0: 102B 0000
FA: 0000 0000
V0: 7027 6006 [0001]
00: 1017 0000
FA: 5100 0000
01: 102A 0001
02: 5100 0000
BP: 2000 00C0 [0001]
EC: 0000 0000 [0000]
T0: 0000 0213 [010F]
System halt!
Cheers
Daniel
