From: Frieder Schrempf <frieder.schre...@kontron.de>
This set contains several improvements for the kontron-sl-mx8mm board
configuration (patches 1-17, 19) and support for a new SoM (patch 18,
including baseboard) that complies to the Open Standard Module (OSM) 1.0
hardware specification, size S (https://sget.org/standards/osm).
Changes in v2:
* rebase on u-boot-imx/master
* new patches 2-5, 19
* fix printf warning in board/kontron/sl-mx8mm/spl.c
* remove unused pinmux definitions in board/kontron/sl-mx8mm/spl.c
* describe SPI NOR partitions in devicetree
* move environment to end of SPI NOR
* Add tags
Frieder Schrempf (19):
imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees
imx: kontron-sl-mx8mm: Add support for loading from SPI NOR in SPL
imx: kontron-sl-mx8mm: Remove custom board_boot_order() workaround
imx: kontron-sl-mx8mm: Increase CONFIG_SYS_CBSIZE to 2K
imx: kontron-sl-mx8mm: Enable MTD command
imx: kontron-sl-mx8mm: Add redundant environment and SPI NOR
partitions
imx: kontron-sl-mx8mm: Enable environment in MMC
imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT
imx: kontron-sl-mx8mm: Enable bootaux command
imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper
alignment
imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint
imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters
imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types
imx: kontron-sl-mx8mm: Adjust board and SoM model strings
imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO
voltage
imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC
regulator-names
imx: kontron-sl-mx8mm: Simplify code in spl.c
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL
i.MX8MM OSM-S
imx: kontron-sl-mx8mm: Prepare for I2C display detection in
environment script
arch/arm/dts/Makefile | 1 -
.../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 -
arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 117 -
.../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 14 +-
arch/arm/dts/imx8mm-kontron-n801x-s.dts | 5 +-
arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 51 +-
.../dts/imx8mm-kontron-n802x-s-u-boot.dtsi | 14 +
arch/arm/dts/imx8mm-kontron-n802x-s.dts | 376 ++++
arch/arm/dts/imx8mm-kontron-n802x-som.dtsi | 309 +++
...tsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} | 21 +-
board/kontron/sl-mx8mm/MAINTAINERS | 1 +
board/kontron/sl-mx8mm/lpddr4_timing.c | 1969 ++++++++---------
board/kontron/sl-mx8mm/sl-mx8mm.c | 44 +
board/kontron/sl-mx8mm/sl-mx8mm.env | 7 +
board/kontron/sl-mx8mm/spl.c | 112 +-
configs/kontron-sl-mx8mm_defconfig | 17 +-
doc/board/kontron/sl-mx8mm.rst | 7 +-
include/configs/kontron-sl-mx8mm.h | 16 +-
18 files changed, 1773 insertions(+), 1314 deletions(-)
delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s.dts
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-som.dtsi
rename arch/arm/dts/{imx8mm-kontron-n801x-u-boot.dtsi =>
imx8mm-kontron-n80xx-s-u-boot.dtsi} (83%)
create mode 100644 board/kontron/sl-mx8mm/sl-mx8mm.env
--
2.37.1
