[PATCH v2 1/7] rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM

[Quentin Schulz]

From: Quentin Schulz <quentin.sch...@theobroma-systems.com>

idbloader.img content - currently created by way of Makefile - can be
created by binman directly.

So let's do that for Rockchip ARM platforms.

Cc: Quentin Schulz <foss+ub...@0leil.net>
Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com>
---
 Makefile                          |  2 +-
 arch/arm/dts/rockchip-u-boot.dtsi | 15 +++++++++++++--
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/Makefile b/Makefile
index d76ec69b52..f780bfe211 100644
--- a/Makefile
+++ b/Makefile
@@ -1005,7 +1005,7 @@ endif
 else
 ifeq ($(CONFIG_SPL),y)
 # Generate these inputs for binman which will create the output files
-INPUTS-y += idbloader.img u-boot.img
+INPUTS-y += u-boot.img
 endif
 endif
 endif
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi 
b/arch/arm/dts/rockchip-u-boot.dtsi
index eae3ee715d..0362c97e0b 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -17,9 +17,20 @@
                filename = "u-boot-rockchip.bin";
                pad-byte = <0xff>;
 
-               blob {
-                       filename = "idbloader.img";
+               mkimage {
+                       args = "-n", CONFIG_SYS_SOC, "-T", "rksd";
+#ifndef CONFIG_TPL
+                       u-boot-spl {
+                       };
                };
+#else
+                       u-boot-tpl {
+                       };
+               };
+
+               u-boot-spl {
+               };
+#endif
 
                u-boot-img {
                        offset = <CONFIG_SPL_PAD_TO>;
-- 
2.37.1