Hello Mamta,
> -----Original Message-----
> From: Mamta Shukla <mamta.shu...@leica-geosystems.com>
> Sent: Thursday, July 7, 2022 2:45 PM
> To: u-boot@lists.denx.de
> Cc: sba...@denx.de; peng....@nxp.com; aford...@gmail.com; GEO-CHHER-bsp-
> development <bsp-development....@leica-geosystems.com>; feste...@denx.de;
> SHUKLA
> Mamta Ramendra <mamta.shu...@leica-geosystems.com>; HAEMMERLE Thomas
> <thomas.haemme...@leica-geosystems.com>
> Subject: [PATCH v4 3/7] configs: Add config for enabling FSPI boot option for
> i.MX8m
>
> Add imx8mm_evk_fspi_defconfig to build QSPI boot image.
> This config is based on imx8mm_evk_defconfig with addtional config options for
> FSPI Header,SPL offset and imx-image config to boot from FSPI.
>
> Signed-off-by: Mamta Shukla <mamta.shu...@leica-geosystems.com>
> Signed-off-by: Thomas Haemmerle <thomas.haemme...@leica-geosystems.com>
> Tested-by: Adam Ford <aford...@gmail.com>
> Reviewed-by: Fabio Estevam <feste...@denx.de>
> ---
> v2:
> -Remove extra line in commit message
> -Remove extra line in imx8mm_evk_fspi_defconfig
> -New patch in series to add an entry for imx8mm_evk_fspi_defconfig in
> board/freescale/imx8mm_evk/MAINTAINERS
>
> v3:
> -No changes
>
> v4:
> -No changes
>
> .../imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg | 9 ++
> configs/imx8mm_evk_fspi_defconfig | 115 ++++++++++++++++++
> 2 files changed, 124 insertions(+)
> create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg
> create mode 100644 configs/imx8mm_evk_fspi_defconfig
>
> diff --git a/board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg
> b/board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg
> new file mode 100644
> index 0000000000..ddcbd11eea
> --- /dev/null
> +++ b/board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg
> @@ -0,0 +1,9 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2021 NXP
> + */
> +
> +#define __ASSEMBLY__
Usage of __ASSEMBLY__ has been dropped in commit 5c86a8f7a191 ("imx: Don't
define __ASSEMBLY__ in source files"), therefore build produces the warning.
Please remove this one.
> +
> +BOOT_FROM fspi
> +LOADER u-boot-spl-ddr.bin 0x7E2000
> diff --git a/configs/imx8mm_evk_fspi_defconfig
> b/configs/imx8mm_evk_fspi_defconfig
> new file mode 100644
> index 0000000000..50f6e4779b
> --- /dev/null
> +++ b/configs/imx8mm_evk_fspi_defconfig
New config file needs a re-sync to what is included on the master, specifically
those 2 commits from Tom:
d46e86d25c2a ("configs: Resync with savedefconfig")
bfdb30559c76 ("configs: Resync with savedefconfig")
> @@ -0,0 +1,115 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_IMX8M=y
> +CONFIG_SYS_TEXT_BASE=0x40200000
> +CONFIG_SYS_MALLOC_LEN=0x2000000
> +CONFIG_SPL_GPIO=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_ENV_SIZE=0x1000
> +CONFIG_ENV_OFFSET=0x400000
> +CONFIG_DM_GPIO=y
> +CONFIG_DEFAULT_DEVICE_TREE="imx8mm-evk"
> +CONFIG_SPL_TEXT_BASE=0x7E2000
> +CONFIG_TARGET_IMX8MM_EVK=y
> +CONFIG_IMX_CONFIG="board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg"
> +CONFIG_SPL_NOR_SUPPORT=y
> +CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_MMC=y
> +CONFIG_SPL_SERIAL=y
> +CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL=y
> +CONFIG_SYS_LOAD_ADDR=0x40480000
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_FIT=y
> +CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> +CONFIG_SPL_LOAD_FIT=y
> +# CONFIG_USE_SPL_FIT_GENERATOR is not set
> +CONFIG_OF_SYSTEM_SETUP=y
> +CONFIG_BOARD_EARLY_INIT=y
> +CONFIG_BOARD_LATE_INIT=y
> +CONFIG_SPL_BOARD_INIT=y
> +CONFIG_SPL_SEPARATE_BSS=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
> +CONFIG_SPL_I2C=y
> +CONFIG_SPL_POWER=y
> +CONFIG_SPL_WATCHDOG=y
> +CONFIG_SYS_PROMPT="u-boot=> "
> +# CONFIG_CMD_EXPORTENV is not set
> +# CONFIG_CMD_IMPORTENV is not set
> +# CONFIG_CMD_CRC32 is not set
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_FUSE=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SYS_MMC_ENV_DEV=1
> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_USE_ETHPRIME=y
> +CONFIG_ETHPRIME="FEC"
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_CLK_COMPOSITE_CCF=y
> +CONFIG_CLK_COMPOSITE_CCF=y
> +CONFIG_SPL_CLK_IMX8MM=y
> +CONFIG_CLK_IMX8MM=y
> +CONFIG_MXC_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_DM_MMC=y
> +CONFIG_SUPPORT_EMMC_BOOT=y
> +CONFIG_MMC_IO_VOLTAGE=y
> +CONFIG_MMC_UHS_SUPPORT=y
> +CONFIG_MMC_HS400_ES_SUPPORT=y
> +CONFIG_MMC_HS400_SUPPORT=y
> +CONFIG_FSL_USDHC=y
> +CONFIG_PHYLIB=y
> +CONFIG_PHY_ATHEROS=y
> +CONFIG_DM_ETH=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_FEC_MXC=y
> +CONFIG_MII=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_IMX8M=y
> +CONFIG_DM_PMIC=y
> +CONFIG_SPL_DM_PMIC_PCA9450=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_PWM=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_PWM_IMX=y
> +CONFIG_MXC_UART=y
> +CONFIG_SYSRESET=y
> +CONFIG_SPL_SYSRESET=y
> +CONFIG_SYSRESET_PSCI=y
> +CONFIG_SYSRESET_WATCHDOG=y
> +CONFIG_DM_THERMAL=y
> +CONFIG_IMX_WATCHDOG=y
> +CONFIG_NXP_FSPI=y
> +CONFIG_SPI=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_DM_SPI=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SF_DEFAULT_BUS=0
> +CONFIG_SF_DEFAULT_CS=0
> +CONFIG_SF_DEFAULT_SPEED=40000000
> +CONFIG_SF_DEFAULT_MODE=0
> +CONFIG_FSPI_CONF_HEADER=y
> +CONFIG_FSPI_CONF_FILE="fspi_header.bin"
> +CONFIG_READ_CLK_SOURCE=0x00
> +CONFIG_DEVICE_TYPE=0x01
> +CONFIG_FLASH_PAD_TYPE=0x01
> +CONFIG_SERIAL_CLK_FREQUENCY=0x02
> +CONFIG_LUT_CUSTOM_SEQUENCE=0x00
> +CONFIG_LUT_SEQUENCE="0x0b, 0x04, 0x18, 0x08, 0x08, 0x30, 0x04, 0x24"
> --
> 2.25.1
Reviewed-by: Andrey Zhizhikin <andrey.zhizhi...@leica-geosystems.com>
