On 2/28/22 08:10, Pali Rohár wrote:
+ Marek, Stefan
On Wednesday 09 February 2022 00:27:00 Rogier Stam wrote:
When storing the UBoot Environment in for example EXT4,
the U-Boot build is broken for several reasons:
1. armada-385-turris-omnia-u-boot.dtsi will not allow
CONFIG_ENV_OFFSET and CONFIG_ENV_SIZE to be undefined
2. armada-37xx/board.c ft_board_setup function does not
exist if CONFIG_ENV_IS_IN_SPI_FLASH is not defined
This commit changes these files so that selecting a
different location for the environment is possible.
Signed-off-by: Rogier Stam <rog...@unrailed.org>
Reviewed-by: Pali Rohár <p...@kernel.org>
Applied to u-boot-marvell/master
Thanks,
Stefan
---
arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi | 2 ++
board/Marvell/mvebu_armada-37xx/board.c | 4 +++-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
b/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
index 3ff76c9..008787e 100644
--- a/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
+++ b/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
@@ -38,6 +38,7 @@
};
};
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
&spi0 {
u-boot,dm-pre-reloc;
@@ -56,6 +57,7 @@
};
};
};
+#endif
&uart0 {
u-boot,dm-pre-reloc;
diff --git a/board/Marvell/mvebu_armada-37xx/board.c
b/board/Marvell/mvebu_armada-37xx/board.c
index d7b6eca..5bace0c 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -328,9 +328,10 @@ int board_network_enable(struct mii_dev *bus)
return 0;
}
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, struct bd_info *bd)
{
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
int ret;
int spi_off;
int parts_off;
@@ -424,6 +425,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
return 0;
}
+#endif
return 0;
}
#endif
--
2.7.4
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
