On 2/7/22 12:18, Adrian Fiergolski wrote:
From: Oleksandr Suvorov <oleksandr.suvo...@foundries.io>
It allows using this feature without enabling the "fpga loads"
command.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvo...@foundries.io>
Tested-by: Ricardo Salveti <rica...@foundries.io>
---
cmd/Kconfig | 3 ++-
drivers/fpga/Kconfig | 14 ++++++++++++++
drivers/fpga/fpga.c | 2 +-
drivers/fpga/xilinx.c | 2 +-
drivers/fpga/zynqmppl.c | 4 ++--
5 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 5e25e45fd2..604ab37f3b 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -949,8 +949,9 @@ config CMD_FPGA_LOADP
a partial bitstream.
config CMD_FPGA_LOAD_SECURE
- bool "fpga loads - loads secure bitstreams (Xilinx only)"
+ bool "fpga loads - loads secure bitstreams"
depends on CMD_FPGA
+ select FPGA_LOAD_SECURE
help
Enables the fpga loads command which is used to load secure
(authenticated or encrypted or both) bitstreams on to FPGA.
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index dc0b3dd31b..262f95a252 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -85,4 +85,18 @@ config FPGA_ZYNQPL
Enable FPGA driver for loading bitstream in BIT and BIN format
on Xilinx Zynq devices.
+config FPGA_LOAD_SECURE
+ bool "Enable loading secure bitstreams"
+ depends on FPGA
+ help
+ Enables the fpga loads() functions that are used to load secure
+ (authenticated or encrypted or both) bitstreams on to FPGA.
+
+config SPL_FPGA_LOAD_SECURE
+ bool "Enable loading secure bitstreams for SPL"
+ depends on FPGA
This should be SPL_FPGA
M
