This register is referenced in one location and does not seem
configurable, so remove it from CONFIG namespace.
Cc: Stefan Roese <s...@denx.de>
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
arch/arm/mach-mvebu/cpu.c | 2 +-
arch/arm/mach-mvebu/include/mach/soc.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 0272dd7352d8..1e893777b292 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -91,7 +91,7 @@ u32 get_boot_device(void)
* be done, via the bootrom error register. Here the
* MSB marks if the UART mode is active.
*/
- val = readl(CONFIG_BOOTROM_ERR_REG);
+ val = readl(BOOTROM_ERR_REG);
boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS;
debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device);
if (boot_device == BOOTROM_ERR_MODE_UART)
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h
b/arch/arm/mach-mvebu/include/mach/soc.h
index aab61f7c15cf..3b9618852c6d 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -125,7 +125,7 @@
#define COMPHY_REFCLK_ALIGNMENT (MVEBU_REGISTER(0x182f8))
/* BootROM error register (also includes some status infos) */
-#define CONFIG_BOOTROM_ERR_REG (MVEBU_REGISTER(0x182d0))
+#define BOOTROM_ERR_REG (MVEBU_REGISTER(0x182d0))
#define BOOTROM_ERR_MODE_OFFS 28
#define BOOTROM_ERR_MODE_MASK (0xf << BOOTROM_ERR_MODE_OFFS)
#define BOOTROM_ERR_MODE_UART 0x6
--
2.25.1
