On 2/2/22 10:08, AKASHI Takahiro wrote: > Every time a mmc bus/port is scanned and a new device is detected, > we want to call device_probe() as it will give us a chance to run > additional post-processings for some purposes. > > In particular, support for creating partitions on a device will be added. > > Signed-off-by: AKASHI Takahiro <takahiro.aka...@linaro.org> > --- > drivers/mmc/mmc-uclass.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c > index b80e838066ca..e918f58a212e 100644 > --- a/drivers/mmc/mmc-uclass.c > +++ b/drivers/mmc/mmc-uclass.c > @@ -467,6 +467,18 @@ static int mmc_blk_probe(struct udevice *dev) > return ret; > } > > + ret = device_probe(dev); > + if (ret) { > + debug("Can't probe\n");
how about displaying return value to debug? Best Regards, Jaehoon Chung > + > + if (IS_ENABLED(CONFIG_MMC_UHS_SUPPORT) || > + IS_ENABLED(CONFIG_MMC_HS200_SUPPORT) || > + IS_ENABLED(CONFIG_MMC_HS400_SUPPORT)) > + mmc_deinit(mmc); > + > + return ret; > + } > + > return 0; > } >