From: Stefan Roese <s...@denx.de>
This change is needed to compile the PPC4xx NAND booting targets
equipped with the IBM DDR2 SDRAM controller.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Wolfgang Denk <w...@denx.de>
---
Stefan, if it's OK with you I will pull this directly.
board/amcc/canyonlands/canyonlands.c | 12 ------------
1 files changed, 0 insertions(+), 12 deletions(-)
diff --git a/board/amcc/canyonlands/canyonlands.c
b/board/amcc/canyonlands/canyonlands.c
index faa3720..80e2739 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -363,18 +363,6 @@ int checkboard(void)
}
#endif /* !defined(CONFIG_ARCHES) */
-#if defined(CONFIG_NAND_U_BOOT)
-/*
- * NAND booting U-Boot version uses a fixed initialization, since the whole
- * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
- * code.
- */
-phys_size_t initdram(int board_type)
-{
- return CONFIG_SYS_MBYTES_SDRAM << 20;
-}
-#endif
-
#if defined(CONFIG_PCI)
int board_pcie_first(void)
{
--
1.7.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
