HI Adam On Mon, Jan 31, 2022 at 9:21 PM Adam Ford <aford...@gmail.com> wrote: > > I have a situation where the same Flash.bin file can boot an MMC card, > but hang when booting over USB. > > In both cases, I can see the FIT file is loaded, and the various items > are identified and placed in their respective folders memory > locations. The only difference I can see is that when jumping to > 0x920000 (ATF), the USB booting hangs and ATF doesn't appear to > execute. Is there some special command that I need to issue to unlock > this memory to execute from it when booting from USB? I am calling > enable_tzc380 from SPL, and I read the first 100 bytes and last 100 > bytes and compared it to my bl31.bin file, and it appears to match, so > I know I can read from it. > > U-Boot SPL 2022.01-00836-g3cc200c91a-dirty (Jan 30 2022 - 07:31:51 -0600) > No pmic > WDT: Not starting watchdog@30280000 > Trying to boot from USB SDP > USB EHCI 1.00 > SDP: initialize... > SDP: handle requests... > Downloading file of size 832080 to 0x40400000... done > Jumping to header at 0x40400000 > Header Tag is not an IMX image > Found header at 0x40417c00 > firmware: 'uboot' > External data: dst=40200000, offset=3000, size=9ddd8 > fdt: 'fdt-1' > External data: dst=4029de00, offset=aaea0, size=87b0 > loadables: 'atf' > External data: dst=920000, offset=a0dd8, size=a0c6 > image entry point: 0x920000 >
Check if the uart used on atf and uboot are mapping correctly (but this should because you can boot from sdcard) ENV_IS_EVERYWHERE in configs file. It's no PMIC a problem when you jump in atf? Michael > <hang> -- Michael Nazzareno Trimarchi Co-Founder & Chief Executive Officer M. +39 347 913 2170 mich...@amarulasolutions.com __________________________________ Amarula Solutions BV Joop Geesinkweg 125, 1114 AB, Amsterdam, NL T. +31 (0)85 111 9172 i...@amarulasolutions.com www.amarulasolutions.com
