Dear Stefan Roese,
In message <201011231431.18905...@denx.de> you wrote:
>
> > --- a/arch/powerpc/cpu/ppc4xx/Makefile
> > +++ b/arch/powerpc/cpu/ppc4xx/Makefile
> > @@ -37,9 +37,9 @@ COBJS := 40x_spd_sdram.o
> > ifndef CONFIG_NAND_SPL
> > ifndef CONFIG_NAND_U_BOOT
> > COBJS += 44x_spd_ddr.o
> > +COBJS-$(CONFIG_SDRAM_PPC4xx_IBM_DDR2) += 44x_spd_ddr2.o
> > endif
> > endif
> > -COBJS-$(CONFIG_SDRAM_PPC4xx_IBM_DDR2) += 44x_spd_ddr2.o
>
> This change introduces the problem with the kilauea/haleakala NAND booting
> images. Yes, I am aware that without this change, canyonlands_nand fails to
> build. I noticed this too right now. I'll send another patch to fix this
> canyonlands_nand build problem shortly.
Without this, kilauea/haleakala NAND boot configurations load the
44x_spd_ddr2 init code, which you said was not the correct thing.
So which is correct?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Inside every old person is a young person wondering what happened.
- Terry Pratchett, _Moving Pictures_
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
