Le 19/11/2010 14:07, Reinhard Meyer a écrit :
> Dear Albert,
>>
>> On 2010-11-19 13:38:00, Albert ARIBAUD wrote:
>>> Le 19/11/2010 13:33, Sebastien Carlier a écrit :
>>>> Is it not possible to tell the linker to place a made-up 32 kB symbol
>>>> within the text section at address 0x40008000? I am not familiar enough
>>>> with ld to tell whether there are restrictions for setting the absolute
>>>> address of a symbol that would disallow it in this case.
>>> You can force a symbol to reside at a given offset, but that will
>>> not make the linker "skip" that symbol when filling the output
>>> section, if that's what you meant.
>>
>> Yes, I was hoping the linker would first allocate space for
>> absolute-address symbols and then fill the gaps with the remaining
>> symbols in whatever order.
>>
>>> If you read up the binutils doc, you'll see that ld fills output
>>> sections based on a "location pointer" (the "dot") that simply moves
>>> on with each input section added -- no skipping, and no jumping from
>>> one region to another either.
>>
>> I see, thank you for pointing this out. This specific behavior actually
>> seems quite essential to the interpretation of linker scripts, so there
>> is probably no hope for any change there.
>
> Have you tried something in the line of:
>
> /* Memory Definitions */
>
> MEMORY
> {
> CODE (rx) : ORIGIN = 0x00000000, LENGTH = 0x0007E000
> DATA (rw) : ORIGIN = 0x40000000, LENGTH = 0x00007A00
> ENET (rw) : ORIGIN = 0x7FE00000, LENGTH = 0x00004000
> }
>
>
> /* Section Definitions */
>
> SECTIONS
> {
>
> /* first section is .text which is used for code */
>
> .text :
> {
> *startup2300.o (.text) /* Startup code */
> *basicio.o (.text) /* basic I/O */
> *(.text) /* remaining code */
>
> *(.glue_7t) *(.glue_7)
>
> }>CODE =0
>
> . = ALIGN(4);
>
> ...
Those regions would most probably inflate the .bin because of the gap
between the various MEMORY areas.
> *maybe* one can define several areas for CODE in the MEMORY section?
Afraid not. :/
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
