> -----Original Message-----
> From: Enric Balletbò i Serra [mailto:[email protected]]
> Sent: Friday, November 19, 2010 6:30 PM
> To: Premi, Sanjeev
> Cc: [email protected]; Steve Sakoman
> Subject: Re: [U-Boot] AM/DM37X How to configure registers to
> get 1000MHz
>
> Hi,
>
> Thanks for your reply
>
> 2010/11/19 Premi, Sanjeev <[email protected]>:
> >> -----Original Message-----
> >> From: [email protected]
> >> [mailto:[email protected]] On Behalf Of Enric
> >> Balletbò i Serra
> >> Sent: Friday, November 19, 2010 2:42 PM
> >> To: [email protected]; Steve Sakoman
> >> Subject: [U-Boot] AM/DM37X How to configure registers to
> get 1000MHz
> >>
> >> Hi all,
> >>
> >> I would ask a question, maybe someone can help, which is the better
> >> way to configure the PRCM registers to get 1000MHz on AM/DM37X
> >> processor ?
> >
> > You need set the multipliers and dividers apprioriately -
> based on the
> > sysclk.
> >
> > Would help to understand the context of "better"?
>
> I'm thinking in two scenarios :
>
> 1. For OMAP35X there are devices that support 600MHz as max frequency
> but others supports 720MHz, I want to set by default 600MHz and if
> device supports 720MHz change to this frequency.
[sp] You can look at one of my patches on linux kernel to identify the
device capability for 600/720MHz.
> 2. For AM/DM37X, maybe I'm wrong, but the default frequency for
> AM/DM37X is set to 600MHz, Like OMAP35X i want to set default to
> 800MHz and i device supports change to 1000MHz.
[sp] The device comes up at 600MHz for now, but there is no limitation
on device to go all the way to 1GHz.
>
> Which is the better way to do this ?
[sp] So, you are looking for common mechanism to go to highest supported
frequency. Right?
>
> Thanks in advance,
> Enric
>
> >
> > ~sanjeev
> >
> >>
> >> Thanks in advance,
> >> Enric
> >> _______________________________________________
> >> U-Boot mailing list
> >> [email protected]
> >> http://lists.denx.de/mailman/listinfo/u-boot
> >>
>
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
