The xilinx board_fdt_blob_setup() implementation makes use of
XILINX_OF_BOARD_DTB_ADDR, but no default value is currently defined for
microblaze. Add one so that microblaze could also work with
CONFIG_OF_SEPARATE.
Signed-off-by: Ovidiu Panait <ovidiu.pan...@windriver.com>
---
board/xilinx/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
index 64507b5d84..1788066173 100644
--- a/board/xilinx/Kconfig
+++ b/board/xilinx/Kconfig
@@ -43,6 +43,7 @@ endif
config XILINX_OF_BOARD_DTB_ADDR
hex "Default DTB pickup address"
default 0x1000 if ARCH_VERSAL
+ default 0x8000 if MICROBLAZE
default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
depends on OF_BOARD || OF_SEPARATE
help
--
2.25.1
