Re: [PATCH] ARM: stm32: Enable DFU MTD support on DHSOM

[Patrick DELAUNAY]

Hi Marek,

On 10/23/21 8:32 PM, Marek Vasut wrote:

All the STM32MP1 based DHSOM have SPI NOR from which they boot,
enable DFU_MTD support to make it possible to expose that SPI NOR
via the DFU.

Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
---
  configs/stm32mp15_dhcom_basic_defconfig | 2 ++
  configs/stm32mp15_dhcor_basic_defconfig | 2 ++
  2 files changed, 4 insertions(+)

diff --git a/configs/stm32mp15_dhcom_basic_defconfig 
b/configs/stm32mp15_dhcom_basic_defconfig
index 5b85f6ad03b..083e199e511 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -81,6 +81,7 @@ CONFIG_TFTP_BLOCKSIZE=1536
  CONFIG_STM32_ADC=y
  CONFIG_SPL_BLOCK_CACHE=y
  CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
  CONFIG_DFU_RAM=y
  CONFIG_DFU_VIRT=y
  CONFIG_SET_DFU_ALT_INFO=y
@@ -98,6 +99,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
  CONFIG_SUPPORT_EMMC_BOOT=y
  CONFIG_STM32_SDMMC2=y
  CONFIG_MTD=y
+CONFIG_DM_MTD=y
  CONFIG_SYS_MTDPARTS_RUNTIME=y
  CONFIG_DM_SPI_FLASH=y
  CONFIG_SPI_FLASH_MACRONIX=y
diff --git a/configs/stm32mp15_dhcor_basic_defconfig 
b/configs/stm32mp15_dhcor_basic_defconfig
index 37dd2754c03..01ac3edb93e 100644
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -79,6 +79,7 @@ CONFIG_STM32_ADC=y
  CONFIG_SPL_BLOCK_CACHE=y
  CONFIG_DFU_MMC=y
  CONFIG_DFU_RAM=y
+CONFIG_DFU_MTD=y
  CONFIG_DFU_VIRT=y
  CONFIG_GPIO_HOG=y
  CONFIG_DM_HWSPINLOCK=y
@@ -94,6 +95,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x53
  CONFIG_SUPPORT_EMMC_BOOT=y
  CONFIG_STM32_SDMMC2=y
  CONFIG_MTD=y
+CONFIG_DM_MTD=y
  CONFIG_DM_SPI_FLASH=y
  CONFIG_SPI_FLASH_MACRONIX=y
  CONFIG_SPI_FLASH_SPANSION=y

minor, detected by

grep -l stm32mp15 configs/* | ./tools/moveconfig.py -s -d -


index 083e199e51..9df475d156 100644
@@ -81,8 +81,8 @@ CONFIG_TFTP_BLOCKSIZE=1536
 CONFIG_STM32_ADC=y
 CONFIG_SPL_BLOCK_CACHE=y
 CONFIG_DFU_MMC=y
-CONFIG_DFU_MTD=y
 CONFIG_DFU_RAM=y
+CONFIG_DFU_MTD=y
 CONFIG_DFU_VIRT=y
 CONFIG_SET_DFU_ALT_INFO=y
 CONFIG_GPIO_HOG=y




Reviewed-by: Patrick Delaunay <patrick.delau...@foss.st.com>

Thanks
Patrick