On 24.09.21 23:06, Marek Behún wrote:
From: Pali Rohár <p...@kernel.org>
SPI/NOR kwbimage may have destination address set to 0xFFFFFFFF, which
means that the image is not downloaded to DDR but rather it is executed
directly from SPI/NOR. In this case execution address is set to SPI/NOR
area.
When patching image to UART type, change destination and execution
addresses from SPI/NOR XIP area to DDR area 0x00800000 (which is default
for A38x).
Signed-off-by: Pali Rohár <p...@kernel.org>
[ refactored ]
Signed-off-by: Marek Behún <marek.be...@nic.cz>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
tools/kwboot.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/tools/kwboot.c b/tools/kwboot.c
index 907a574bfc..b1dcd3796c 100644
--- a/tools/kwboot.c
+++ b/tools/kwboot.c
@@ -836,6 +836,14 @@ kwboot_img_patch_hdr(void *img, size_t size)
if (srcaddr == 0xFFFFFFFF)
hdr->srcaddr = cpu_to_le32(hdrsz);
break;
+
+ case IBR_HDR_SPI_ID:
+ if (hdr->destaddr == cpu_to_le32(0xFFFFFFFF)) {
+ kwboot_printv("Patching destination and execution addresses
from SPI/NOR XIP area to DDR area 0x00800000\n");
+ hdr->destaddr = cpu_to_le32(0x00800000);
+ hdr->execaddr = cpu_to_le32(0x00800000);
+ }
+ break;
}
is_secure = kwboot_img_is_secure(img);
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de