Andre Schwarz <andre.schw...@matrix-vision.de> wrote on 2010/11/04 13:28:27: > > > >> Andy, > >> > >>>> Sure, but until freescale or someone else with eq. and motivation > >>>> researches it, we are stuck. I am not sure anyone else has tried > >>>> 83xx based boards yet. If someone has please report. Also > >>>> include weather booted from NAND or NOR, CPU type(e300cX) and > >>>> what reset vector is used. > >>>> > >>>> > >>> I have a couple of Freescale reference boards here (8313ERDB and > >>> 8349-MITX-GP). I'm not a powerpc expert by any means but if there are > >>> some > >>> (simple) tests you would like me to run on them then I will see if I can > >>> find some time. > >>> > >>> > >> I can see this issues only on MPC837x, i.e. *not* on MPC834x. > >> > > -E_TOO_LITTLE_INFO > > > > sorry. > > I meant that e.g. mvblm7 board (=MPC8343) works like a charm from > current mainline U-Boot.
still -E_TOO_LITTLE_INFO: "include weather booted from NAND or NOR, CPU type(e300cX) and what reset vector is used." > > My latest MPC8377 board does not even start without your suggested 4 nops. > It does not start (i.e. serial line completely dead) with any USB > functionality defined. Something else is broken here, no idea what. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
