Hello Samuel, On 22.08.21 01:05, Samuel Holland wrote: > Two displays supported by the sunxi display driver (each one used by a > single board) require initialization over I2C. Both previously used > i2c_soft; replace this with the i2c-gpio instance that already exists in > those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus). > > Since the i2c-gpio nodes are not referenced by any other node in the > device trees (the device trees have no panel node), the I2C bus is > selected by its node name. > > This panel initialization code was the only i2c_soft user, so the > i2c_soft GPIO setup code can be removed now as well. > > Signed-off-by: Samuel Holland <sam...@sholland.org> > --- > > arch/arm/mach-sunxi/Kconfig | 22 ++---- > board/sunxi/board.c | 44 +----------- > configs/Colombus_defconfig | 6 -- > configs/UTOO_P66_defconfig | 3 - > drivers/video/anx9804.c | 107 ++++++++++++++-------------- > drivers/video/anx9804.h | 5 +- > drivers/video/sunxi/sunxi_display.c | 55 +++++++++----- > include/configs/sunxi-common.h | 17 ----- > 8 files changed, 102 insertions(+), 157 deletions(-)
Reviewed-by: Heiko Schocher <h...@denx.de> bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
