Hi Tom,
On Sun, 25 Jul 2021 at 15:10, Tom Rini <tr...@konsulko.com> wrote:
>
> So, I'm trying to fix the problem on am335x_evm (and some family
> configs) with needing SPL_OF_CONTROL enabled. This is mostly fine just
> enabling the option, except on am335x_evm itself, which is the
> kitchen-sink config and overflows memory. I've gone with switching to
> SPL_OF_PLATDATA there as am335x in general has all of the U_BOOT_DRVINFO
> entries it needs I believe. But, with the following patch:
>
> diff --git a/arch/arm/dts/am335x-evm-u-boot.dtsi
> b/arch/arm/dts/am335x-evm-u-boot.dtsi
> index 4cf5f9928d58..514f682cac99 100644
> --- a/arch/arm/dts/am335x-evm-u-boot.dtsi
> +++ b/arch/arm/dts/am335x-evm-u-boot.dtsi
> @@ -8,6 +8,7 @@
> &l4_per {
>
> segment@300000 {
> + u-boot,dm-pre-reloc;
>
> target-module@e000 {
> u-boot,dm-pre-reloc;
> diff --git a/configs/am335x_boneblack_vboot_defconfig
> b/configs/am335x_boneblack_vboot_defconfig
> index a0baeec79edd..ffeefd1a0087 100644
> --- a/configs/am335x_boneblack_vboot_defconfig
> +++ b/configs/am335x_boneblack_vboot_defconfig
> @@ -31,6 +31,7 @@ CONFIG_CMD_SPL=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_BOOTP_DNS2=y
> CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> CONFIG_ENV_OVERWRITE=y
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
> index a33efff42a74..f35b2a02f56b 100644
> --- a/configs/am335x_evm_defconfig
> +++ b/configs/am335x_evm_defconfig
> @@ -37,13 +37,16 @@ CONFIG_MTDIDS_DEFAULT="nand0=nand.0"
>
> CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
> # CONFIG_SPL_EFI_PARTITION is not set
> CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk
> am335x-bonegreen am335x-icev2 am335x-pocketbeagle"
> +CONFIG_SPL_OF_PLATDATA=y
> CONFIG_ENV_OVERWRITE=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> CONFIG_SPL_ENV_IS_NOWHERE=y
> CONFIG_VERSION_VARIABLE=y
> CONFIG_BOOTP_SEND_HOSTNAME=y
> +# CONFIG_SPL_SIMPLE_BUS is not set
> CONFIG_BOOTCOUNT_LIMIT=y
> CONFIG_CLK=y
> CONFIG_CLK_CDCE9XX=y
> diff --git a/configs/am335x_evm_spiboot_defconfig
> b/configs/am335x_evm_spiboot_defconfig
> index 8f0c330674a9..4a2a56a9af9e 100644
> --- a/configs/am335x_evm_spiboot_defconfig
> +++ b/configs/am335x_evm_spiboot_defconfig
> @@ -32,6 +32,7 @@ CONFIG_BOOTP_DNS2=y
> CONFIG_CMD_MTDPARTS=y
> # CONFIG_SPL_EFI_PARTITION is not set
> CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk
> am335x-bonegreen am335x-icev2 am335x-pocketbeagle"
> CONFIG_ENV_OVERWRITE=y
> # CONFIG_ENV_IS_IN_FAT is not set
>
> I get the following failure and I don't see how to debug this:
> DTOC spl/dts/dt-plat.c
> Traceback (most recent call last):
> File "./tools/dtoc/dtoc", line 115, in <module>
> args.phase, instantiate=args.instantiate)
> File "/home/trini/work/u-boot/u-boot/tools/dtoc/../dtoc/dtb_platdata.py",
> line 1223, in run_steps
> outfile.method(plat)
> File "/home/trini/work/u-boot/u-boot/tools/dtoc/../dtoc/dtb_platdata.py",
> line 1081, in generate_plat
> self.output_node_plat(node)
> File "/home/trini/work/u-boot/u-boot/tools/dtoc/../dtoc/dtb_platdata.py",
> line 1023, in output_node_plat
> self._output_values(node)
> File "/home/trini/work/u-boot/u-boot/tools/dtoc/../dtoc/dtb_platdata.py",
> line 812, in _output_values
> self._output_prop(node, node.props[pname])
> File "/home/trini/work/u-boot/u-boot/tools/dtoc/../dtoc/dtb_platdata.py",
> line 798, in _output_prop
> self._output_list(node, prop)
> File "/home/trini/work/u-boot/u-boot/tools/dtoc/../dtoc/dtb_platdata.py",
> line 628, in _output_list
> vals.append(get_value(prop.type, val))
> File "/home/trini/work/u-boot/u-boot/tools/dtoc/../dtoc/dtb_platdata.py",
> line 126, in get_value
> val = '%#x' % fdt_util.fdt32_to_cpu(value)
> File "/home/trini/work/u-boot/u-boot/tools/dtoc/../dtoc/fdt_util.py", line
> 28, in fdt32_to_cpu
> return struct.unpack('>I', val)[0]
> TypeError: a bytes-like object is required, not 'bool'
> scripts/Makefile.spl:352: recipe for target 'spl/dts/dt-plat.c' failed
> make[1]: *** [spl/dts/dt-plat.c] Error 1
> make[1]: *** Deleting file 'spl/dts/dt-plat.c'
> Makefile:1999: recipe for target 'spl/u-boot-spl' failed
> make: *** [spl/u-boot-spl] Error 2
That seems like a bug, where perhaps it is seeing a property with no
value so it thinks it is a bool, but then somehow tries to gets its
int value.
I added a print to _output_list()
else:
print('node', node.path, prop.name)
for val in prop.value:
vals.append(get_value(prop.type, val))
and see that it is the 'ranges' property. Definitely seems like a bug
but I'll have to dig into it I think. The Prop() class selects a bool
type when the value is empty, but somehow that isn't happening.
Regards,
Simon
