The CONFIG_SPL_RAW_IMAGE_SUPPORT option requires that binman provides an offset for the image (see spl_set_header_raw_uboot()), if binman is used. These boards use FIT to store U-Boot, so raw image support is not used.
Drop this option to avoid errors once binman starts checking this. Signed-off-by: Simon Glass <s...@chromium.org> --- Changes in v2: - Add a new patch to drop raw image support for some imx8 boards configs/imx8mm-cl-iot-gate_defconfig | 1 + configs/imx8mm_evk_defconfig | 1 + configs/imx8mn_ddr4_evk_defconfig | 1 + configs/imx8mp_evk_defconfig | 1 + configs/imx8mq_cm_defconfig | 1 + configs/kontron_sl28_defconfig | 1 + configs/phycore-imx8mp_defconfig | 1 + 7 files changed, 7 insertions(+) diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig index f46f45bda91..a1ded18f7e8 100644 --- a/configs/imx8mm-cl-iot-gate_defconfig +++ b/configs/imx8mm-cl-iot-gate_defconfig @@ -30,6 +30,7 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/compulab/imx8mm-cl-iot-gate/imximage-8mm-lpddr4.cfg" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig index a06c6f9794a..9dc0be6b09e 100644 --- a/configs/imx8mm_evk_defconfig +++ b/configs/imx8mm_evk_defconfig @@ -27,6 +27,7 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig index 205757da229..a96f729bde9 100644 --- a/configs/imx8mn_ddr4_evk_defconfig +++ b/configs/imx8mn_ddr4_evk_defconfig @@ -30,6 +30,7 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-ddr4-evk.dtb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index d0f390ed776..df4463ca2b6 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -31,6 +31,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_I2C_SUPPORT=y diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig index e11122e645f..72d9ec8b258 100644 --- a/configs/imx8mq_cm_defconfig +++ b/configs/imx8mq_cm_defconfig @@ -25,6 +25,7 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ronetix/imx8mq-cm/imximage-8mq-lpddr4.cfg" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SYS_PROMPT="u-boot=> " diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index 29a45ec54bc..3868d7c39b0 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -31,6 +31,7 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOARD_LATE_INIT=y CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 32d538c8bbb..d63cba70108 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -27,6 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="oftree" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_I2C_SUPPORT=y -- 2.32.0.432.gabb21c7263-goog
