Hello Reinhard, Reinhard Meyer wrote: > On 28.10.2010 08:20, Reinhard Meyer wrote: >> On 28.10.2010 08:17, Heiko Schocher wrote: >>> Hello Reinhard, >>> >>> Reinhard Meyer wrote: >>>> Dear Darius, >>>>>> Now running in RAM - U-Boot at: 57fbe000 >>>>>> NAND: raise: Signal # 8 caught >>>>>> raise: Signal # 8 caught >>>>>> raise: Signal # 8 caught >>>>> This looks suspect to me. Seems to me some early init >>>>> (pin setup? clocks?) is not OK. If you have early inits, >>>>> you must do that now in board_early_init_f() (and you >>>>> have to define CONFIG_BOARD_EARLY_INIT_F to enable this >>>>> feature) >>>> I got _exactly_ the same NAND messages when ARM relocation >>>> was first used, because the timer.c did use static variables >>>> which are not working _before relocation_. >>>> Have a look at your timer implementation. >>> >>> Huh.. thought the elf relocation fixed this problem? >> 2x Huh.. How would it? I moved the timer static vars into >> global_data, THAT fixed the issue. > OK, I should have mentioned, that those variables are values > that are calculated _before_ relocation in timer_init and > needed to have those values for any subsequent timer use > before and after relocation...
Ah, ok! bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
