Commit b81406db51a6 ("arm: serial: Add debug UART capability to the
pl01x driver") add supports to use pl01x as a debug UART. However,
due to CONFIG_IS_ENABLED macro requires CONFIG_SPL_* prefix, the
_debug_uart_init() would not choose TYPE_PL011 in SPL build. This
patch fixes the bug by judging CONFIG_DEBUG_UART_PL011 explicitly.
Signed-off-by: Chen Baozi <chenba...@phytium.com.cn>
---
drivers/serial/serial_pl01x.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 8ff19acf33..67caa063c9 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -404,8 +404,12 @@ static void _debug_uart_init(void)
{
#ifndef CONFIG_DEBUG_UART_SKIP_INIT
struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE;
- enum pl01x_type type = CONFIG_IS_ENABLED(DEBUG_UART_PL011) ?
- TYPE_PL011 : TYPE_PL010;
+ enum pl01x_type type;
+
+ if (IS_ENABLED(CONFIG_DEBUG_UART_PL011))
+ type = TYPE_PL011;
+ else
+ type = TYPE_PL010;
pl01x_generic_serial_init(regs, type);
pl01x_generic_setbrg(regs, type,
--
2.28.0
