[PATCH v3 04/14] ast2600: spl: Add HACE probing

[Chia-Wei Wang]

From: Joel Stanley <j...@jms.id.au>

Probe HACE driver in SPL board init if enabled.

Signed-off-by: Joel Stanley <j...@jms.id.au>
Signed-off-by: Chia-Wei Wang <chiawei_w...@aspeedtech.com>
---
 arch/arm/mach-aspeed/ast2600/spl.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/mach-aspeed/ast2600/spl.c 
b/arch/arm/mach-aspeed/ast2600/spl.c
index 0d8cb29678..a0fc420ff1 100644
--- a/arch/arm/mach-aspeed/ast2600/spl.c
+++ b/arch/arm/mach-aspeed/ast2600/spl.c
@@ -38,6 +38,20 @@ struct image_header *spl_get_load_buffer(ssize_t offset, 
size_t size)
        return (struct image_header *)(CONFIG_SYS_TEXT_BASE);
 }
 
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void)
+{
+       int rc;
+       struct udevice *dev;
+
+       rc = uclass_get_device_by_driver(UCLASS_MISC,
+                                        DM_DRIVER_GET(aspeed_hace),
+                                        &dev);
+       if (rc)
+               debug("HACE initialization failure, rc=%d\n", rc);
+}
+#endif
+
 #ifdef CONFIG_SPL_OS_BOOT
 int spl_start_uboot(void)
 {
-- 
2.17.1