On 01.07.21 06:26, Tony Dinh wrote:
Convert to Driver Model.
- Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig
- Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig
- Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig
- Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR
to nsa310s_defconfig
Signed-off-by: Tony Dinh <mibo...@gmail.com>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
configs/nsa310s_defconfig | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
index e4cf1c470e..fac0322e2b 100644
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@@ -7,14 +7,16 @@ CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_NSA310S=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="nsa310s => "
+CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server"
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
@@ -44,3 +46,11 @@ CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_BZIP2=y
CONFIG_OF_LIBFDT=y
+CONFIG_DM=y
+CONFIG_BLK=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_USB=y
+CONFIG_DM_ETH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_CMD_SATA=y
+CONFIG_SATA_MV=y
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
