In the Linux DT the file rk3328.dtsi has recently had
some updates. Update this for U-boot as well.
The rk3328 usb3 port has now support in the Linux DT.
Rename node names ending on 'gpio' to 'pin' or 'pins'.
Signed-off-by: Johan Jonker <jbx6...@gmail.com>
---
arch/arm/dts/rk3328-evb.dts | 2 +-
arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 2 +-
arch/arm/dts/rk3328-nanopi-r2s.dts | 2 +-
arch/arm/dts/rk3328-roc-cc-u-boot.dtsi | 2 +-
arch/arm/dts/rk3328-roc-cc.dts | 2 +-
arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi | 2 +-
arch/arm/dts/rk3328-rock-pi-e.dts | 2 +-
arch/arm/dts/rk3328-rock64-u-boot.dtsi | 2 +-
arch/arm/dts/rk3328-rock64.dts | 2 +-
arch/arm/dts/rk3328.dtsi | 109 +++++++++++++++++------------
10 files changed, 72 insertions(+), 55 deletions(-)
diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts
index 6abc6f4a86..a0000d072c 100644
--- a/arch/arm/dts/rk3328-evb.dts
+++ b/arch/arm/dts/rk3328-evb.dts
@@ -41,7 +41,7 @@
compatible = "regulator-fixed";
gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
index 9e2ced1541..8db5e55af6 100644
--- a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
@@ -20,7 +20,7 @@
u-boot,dm-spl;
};
-&sdmmc0m1_gpio {
+&sdmmc0m1_pin {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/rk3328-nanopi-r2s.dts
b/arch/arm/dts/rk3328-nanopi-r2s.dts
index 5445c5cb3d..b1e45c01a9 100644
--- a/arch/arm/dts/rk3328-nanopi-r2s.dts
+++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
@@ -79,7 +79,7 @@
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
pinctrl-names = "default";
regulator-name = "vcc_sd";
regulator-boot-on;
diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
index 08806dfc0f..20a62134a0 100644
--- a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
@@ -40,7 +40,7 @@
u-boot,dm-spl;
};
-&sdmmc0m1_gpio {
+&sdmmc0m1_pin {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/rk3328-roc-cc.dts b/arch/arm/dts/rk3328-roc-cc.dts
index 8d553c9218..8dc4c57fbb 100644
--- a/arch/arm/dts/rk3328-roc-cc.dts
+++ b/arch/arm/dts/rk3328-roc-cc.dts
@@ -34,7 +34,7 @@
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-boot-on;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
index 4fc055eacb..0b1a42c49f 100644
--- a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
@@ -37,7 +37,7 @@
u-boot,dm-spl;
};
-&sdmmc0m1_gpio {
+&sdmmc0m1_pin {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts
b/arch/arm/dts/rk3328-rock-pi-e.dts
index 4b9f9a8248..57e36ec609 100644
--- a/arch/arm/dts/rk3328-rock-pi-e.dts
+++ b/arch/arm/dts/rk3328-rock-pi-e.dts
@@ -25,7 +25,7 @@
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-name = "vcc_sd";
regulator-always-on;
regulator-boot-on;
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi
b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
index 2af32aea05..3c3b1370e3 100644
--- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -40,7 +40,7 @@
u-boot,dm-spl;
};
-&sdmmc0m1_gpio {
+&sdmmc0m1_pin {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts
index ebf3eb222e..7a78255f52 100644
--- a/arch/arm/dts/rk3328-rock64.dts
+++ b/arch/arm/dts/rk3328-rock64.dts
@@ -25,7 +25,7 @@
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/dts/rk3328.dtsi b/arch/arm/dts/rk3328.dtsi
index 945387e579..95c7c70ca0 100644
--- a/arch/arm/dts/rk3328.dtsi
+++ b/arch/arm/dts/rk3328.dtsi
@@ -142,23 +142,6 @@
};
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac: dmac@ff1f0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff1f0000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_DMAC>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
- };
-
analog_sound: analog-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -305,7 +288,7 @@
status = "disabled";
};
- grf_gpio: grf-gpio {
+ grf_gpio: gpio {
compatible = "rockchip,rk3328-grf-gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -317,15 +300,18 @@
#address-cells = <1>;
#size-cells = <0>;
- pd_hevc@RK3328_PD_HEVC {
+ power-domain@RK3328_PD_HEVC {
reg = <RK3328_PD_HEVC>;
+ #power-domain-cells = <0>;
};
- pd_video@RK3328_PD_VIDEO {
+ power-domain@RK3328_PD_VIDEO {
reg = <RK3328_PD_VIDEO>;
+ #power-domain-cells = <0>;
};
- pd_vpu@RK3328_PD_VPU {
+ power-domain@RK3328_PD_VPU {
reg = <RK3328_PD_VPU>;
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ #power-domain-cells = <0>;
};
};
@@ -452,7 +438,7 @@
};
wdt: watchdog@ff1a0000 {
- compatible = "snps,dw-wdt";
+ compatible = "rockchip,rk3328-wdt", "snps,dw-wdt";
reg = <0x0 0xff1a0000 0x0 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_WDT>;
@@ -503,6 +489,17 @@
status = "disabled";
};
+ dmac: dmac@ff1f0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff1f0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
thermal-zones {
soc_thermal: soc-thermal {
polling-delay-passive = <20>;
@@ -552,9 +549,9 @@
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_gpio>;
+ pinctrl-0 = <&otp_pin>;
pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_gpio>;
+ pinctrl-2 = <&otp_pin>;
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
rockchip,grf = <&grf>;
@@ -822,7 +819,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rk3328-usb2phy";
reg = <0x100 0x10>;
clocks = <&xin24m>;
@@ -922,11 +919,12 @@
"mac_clk_tx", "clk_mac_ref",
"aclk_mac", "pclk_mac",
"clk_macphy";
- resets = <&cru SRST_GMAC2PHY_A>, <&cru SRST_MACPHY>;
- reset-names = "stmmaceth", "mac-phy";
+ resets = <&cru SRST_GMAC2PHY_A>;
+ reset-names = "stmmaceth";
phy-mode = "rmii";
phy-handle = <&phy>;
snps,txpbl = <0x4>;
+ clock_in_out = "output";
status = "disabled";
mdio {
@@ -934,7 +932,7 @@
#address-cells = <1>;
#size-cells = <0>;
- phy: phy@0 {
+ phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
clocks = <&cru SCLK_MAC2PHY_OUT>;
@@ -991,6 +989,25 @@
status = "disabled";
};
+ usbdrd3: usb@ff600000 {
+ compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+ <&cru ACLK_USB3OTG>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ status = "disabled";
+ };
+
gic: interrupt-controller@ff811000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1163,7 +1180,7 @@
rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
<0 RK_PA6 2 &pcfg_pull_none>;
};
- i2c3_gpio: i2c3-gpio {
+ i2c3_pins: i2c3-pins {
rockchip,pins =
<0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -1234,7 +1251,7 @@
};
tsadc {
- otp_gpio: otp-gpio {
+ otp_pin: otp-pin {
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO
&pcfg_pull_none>;
};
@@ -1245,8 +1262,8 @@
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>,
- <1 RK_PB0 1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+ <1 RK_PB0 1 &pcfg_pull_up>;
};
uart0_cts: uart0-cts {
@@ -1257,15 +1274,15 @@
rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
};
- uart0_rts_gpio: uart0-rts-gpio {
+ uart0_rts_pin: uart0-rts-pin {
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO
&pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>,
- <3 RK_PA6 4 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>,
+ <3 RK_PA6 4 &pcfg_pull_up>;
};
uart1_cts: uart1-cts {
@@ -1276,22 +1293,22 @@
rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
};
- uart1_rts_gpio: uart1-rts-gpio {
+ uart1_rts_pin: uart1-rts-pin {
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO
&pcfg_pull_none>;
};
};
uart2-0 {
uart2m0_xfer: uart2m0-xfer {
- rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>,
- <1 RK_PA1 2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>,
+ <1 RK_PA1 2 &pcfg_pull_up>;
};
};
uart2-1 {
uart2m1_xfer: uart2m1-xfer {
- rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>,
- <2 RK_PA1 1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+ <2 RK_PA1 1 &pcfg_pull_up>;
};
};
@@ -1502,7 +1519,7 @@
rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
};
- sdmmc0m0_gpio: sdmmc0m0-gpio {
+ sdmmc0m0_pin: sdmmc0m0-pin {
rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO
&pcfg_pull_up_4ma>;
};
};
@@ -1512,7 +1529,7 @@
rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
};
- sdmmc0m1_gpio: sdmmc0m1-gpio {
+ sdmmc0m1_pin: sdmmc0m1-pin {
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO
&pcfg_pull_up_4ma>;
};
};
@@ -1545,7 +1562,7 @@
<1 RK_PA3 1 &pcfg_pull_up_8ma>;
};
- sdmmc0_gpio: sdmmc0-gpio {
+ sdmmc0_pins: sdmmc0-pins {
rockchip,pins =
<1 RK_PA6 RK_FUNC_GPIO
&pcfg_pull_up_4ma>,
<1 RK_PA4 RK_FUNC_GPIO
&pcfg_pull_up_4ma>,
@@ -1587,7 +1604,7 @@
<3 RK_PA7 3 &pcfg_pull_up_4ma>;
};
- sdmmc0ext_gpio: sdmmc0ext-gpio {
+ sdmmc0ext_pins: sdmmc0ext-pins {
rockchip,pins =
<3 RK_PA0 RK_FUNC_GPIO
&pcfg_pull_up_4ma>,
<3 RK_PA1 RK_FUNC_GPIO
&pcfg_pull_up_4ma>,
@@ -1632,7 +1649,7 @@
<1 RK_PC1 1 &pcfg_pull_up_8ma>;
};
- sdmmc1_gpio: sdmmc1-gpio {
+ sdmmc1_pins: sdmmc1-pins {
rockchip,pins =
<1 RK_PB4 RK_FUNC_GPIO
&pcfg_pull_up_4ma>,
<1 RK_PB5 RK_FUNC_GPIO
&pcfg_pull_up_4ma>,
@@ -1826,7 +1843,7 @@
tsadc_int: tsadc-int {
rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
};
- tsadc_gpio: tsadc-gpio {
+ tsadc_pin: tsadc-pin {
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO
&pcfg_pull_none>;
};
};
--
2.11.0
