On Wed, 16 Jun 2021 10:33:23 +0800
qianfangui...@163.com (qianfangui...@163.com) wrote:
Hi,
first many thanks for sending this! Indeed OTG support was
broken/missing on the R40, also in Linux.
So it seems you have the found the problem: the missing PHY multiplex.
Many thanks for that! This indeed enables OTG functionality for me
(although with some changes). That means that actually a similar patch
needs to go through Linux.
Do you plan on enabling support in Linux as well?
> From: qianfan Zhao <qianfangui...@163.com>
>
> The address of sun8i_r40's phyctrl is 0x01c13404,
But this isn't quite right, is it? See below.
> enable_pmu and dual_route.
Ah, of course! The R40 is closer to the A33/A23 here, with not having
separate EHCI0/OHCI0 controllers, instead relying on the MUSB host IP.
So indeed we don't have the PHY multiplex for PHY0.
I think this is the root cause of the non-working OTG support so far!
> Signed-off-by: qianfan Zhao <qianfangui...@163.com>
> ---
> drivers/phy/allwinner/phy-sun4i-usb.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
> b/drivers/phy/allwinner/phy-sun4i-usb.c
> index 5723c98032..608ba46242 100644
> --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> @@ -587,10 +587,10 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
> .num_phys = 3,
> .type = sun8i_r40_phy,
> .disc_thresh = 3,
> - .phyctl_offset = REG_PHYCTL_A33,
> + .phyctl_offset = REG_PHYCTL_A10,
So this doesn't work for me, no device appearing on the host. Also
writing anything to this register (+0x04) reads back as 0, so it's not
implemented, as in the H3. The register at +0x10 however works, and if I
keep the A33 line, OTG indeed works for me. Same in Linux, btw.
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = true,
> - .phy0_dual_route = true,
> + .enable_pmu_unk1 = false,
> + .phy0_dual_route = false,
If they are false, you don't need to list them, the default of 0 will
take care of this.
Cheers,
Andre
> };
>
> static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
