On Fri, 4 Jun 2021 22:00:30 +0530, Aswath Govindraju wrote:
> The following series of patches add support for the following
> - Kconfig symbol for giving the load address for ATF
> - USB Mass storage boot mode in AM642-EVM
> - DFU boot mode in AM642-EVM
> - Host and peripheral modes for AM642-EVM in U-Boot
> - Set the USB PHY core voltage to 0.85V
>
> [...]
Applied to https://source.denx.de/u-boot/custodians/u-boot-ti.git master,
thanks!
[01/10] tools: k3_fit_atf: Add support for providing ATF load address using a
Kconfig symbol
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/0c51509224
[02/10] arm: mach-k3: am642_init: Add support for USB boot mode
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/3ae127c4e2
[03/10] arm: mach-k3: am642_init: Do USB fixups to facilitate host and device
boot modes
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/669a03e0ff
[04/10] board: ti: am64x: Set the core voltage of USB PHY to 0.85V
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/397d7b0fae
[05/10] arm: dts: k3-am64-main: Add USB DT nodes
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/cdb738411f
[06/10] arm: dts: k3-am642-*-evm: Add USB support
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/7803a5bda9
[07/10] arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to
peripheral for USB subsystem
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/1c8b404b88
[08/10] configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to
satisfy the limitations for USB DFU boot mode
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/26f32c32b2
[09/10] arm: dts: k3-am64-main: Update the location of ATF in SRAM and increase
its max size
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/defd62ca13
[10/10] configs: am64: Enable configs to support USB host and device modes
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/ce7ad57390
--
Thanks and Regards,
Lokesh
