> Add i.MX8QM qmx8 congatec board support > U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) > CPU: NXP i.MX8QM RevB A53 at 1200 MHz > Model: Congatec QMX8 Qseven series > Board: conga-QMX8 > Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 > Boot: SD2 > DRAM: 6 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 > Loading Environment from MMC... OK > In: serial@5a060000 > Out: serial@5a060000 > Err: serial@5a060000 > switch to partitions #0, OK > mmc2 is current device > Net: > Error: ethernet@5b040000 address not set. > No ethernet found. > Hit any key to stop autoboot: 0 > Signed-off-by: Oliver Graute <oliver.gra...@kococonnector.com> > Cc: Stefano Babic <sba...@denx.de> > Cc: Fabio Estevam <feste...@gmail.com> > Cc: Peng Fan <peng....@nxp.com> > Cc: Simon Glass <s...@chromium.org> > Cc: Ye Li <ye...@nxp.com> > Cc: uboot-imx <uboot-...@nxp.com> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================
