Dear Reinhard Meyer,

Am 19.10.2010 um 20:30 schrieb Reinhard Meyer:
>> +#define CONFIG_SYS_TEXT_BASE                0x00000000
> How does this work with a text base of 0? Am I missing something?

This should work when booting from NOR. The first MiB (0x00000000-0x00100000) 
is mapped to internal SRAM, internal ROM _or_ NOR on CS0 depending on 'BMS' Pin 
and REMAP command -> datasheet at91rm9200 p17. Nevertheless I would prefer to 
explicitly address NOR flash on CS0 with 0x10000000.

regards

Andreas Bießmann
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to