On 3/2/21 4:34 PM, Bin Meng wrote:
> At present phy_connect_gmii2rgmii() is implemented using a DM API
> dev_of_offset() hence it cannot support a non-DM configuration.
> Remove the non-DM version prototype of phy_connect_gmii2rgmii()
> and make the driver depend on CONFIG_DM_ETH.
> 
> Signed-off-by: Bin Meng <bmeng...@gmail.com>
> ---
> 
>  drivers/net/phy/Kconfig | 1 +
>  drivers/net/phy/phy.c   | 6 ------
>  2 files changed, 1 insertion(+), 6 deletions(-)
> 
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index d69503067d..070ffa82cb 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -292,6 +292,7 @@ config PHY_XILINX
>  
>  config PHY_XILINX_GMII2RGMII
>       bool "Xilinx GMII to RGMII Ethernet PHYs support"
> +     depends on DM_ETH
>       help
>         This adds support for Xilinx GMII to RGMII IP core. This IP acts
>         as bridge between MAC connected over GMII and external phy that
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 89e3076bfd..d9e03baf7b 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -942,15 +942,9 @@ void phy_connect_dev(struct phy_device *phydev, struct 
> eth_device *dev)
>  }
>  
>  #ifdef CONFIG_PHY_XILINX_GMII2RGMII
> -#ifdef CONFIG_DM_ETH
>  static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
>                                                struct udevice *dev,
>                                                phy_interface_t interface)
> -#else
> -static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
> -                                              struct eth_device *dev,
> -                                              phy_interface_t interface)
> -#endif
>  {
>       struct phy_device *phydev = NULL;
>       int sn = dev_of_offset(dev);
> 

Looks good to me.

Acked-by: Michal Simek <michal.si...@xilinx.com>

Thanks,
Michal

Reply via email to