At present phy_connect_gmii2rgmii() is implemented using a DM API dev_of_offset() hence it cannot support a non-DM configuration. Remove the non-DM version prototype of phy_connect_gmii2rgmii() and make the driver depend on CONFIG_DM_ETH.
Signed-off-by: Bin Meng <bmeng...@gmail.com> --- drivers/net/phy/Kconfig | 1 + drivers/net/phy/phy.c | 6 ------ 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d69503067d..070ffa82cb 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -292,6 +292,7 @@ config PHY_XILINX config PHY_XILINX_GMII2RGMII bool "Xilinx GMII to RGMII Ethernet PHYs support" + depends on DM_ETH help This adds support for Xilinx GMII to RGMII IP core. This IP acts as bridge between MAC connected over GMII and external phy that diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 89e3076bfd..d9e03baf7b 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -942,15 +942,9 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev) } #ifdef CONFIG_PHY_XILINX_GMII2RGMII -#ifdef CONFIG_DM_ETH static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus, struct udevice *dev, phy_interface_t interface) -#else -static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus, - struct eth_device *dev, - phy_interface_t interface) -#endif { struct phy_device *phydev = NULL; int sn = dev_of_offset(dev); -- 2.25.1