Hi Ilya, On 8/19/2010 2:09 AM, Ilya Yanok wrote: > Some boards need their board-specific PHY quirks to be called > to PHY to work normally. As mpc5xxx_fec driver uses on demand > PHY initialization and can even reinit PHY during normal operation > we can't count on reset_phy() call from arch/<arch>/lib/board.c > (it is most likely called _before_ we init the PHY from the > driver) so we need to add call to reset_phy() directly in the > driver. > > Cc: Ben Warren<biggerbadder...@gmail.com> > Signed-off-by: Ilya Yanok<ya...@emcraft.com> > --- > drivers/net/mpc5xxx_fec.c | 7 +++++++ > 1 files changed, 7 insertions(+), 0 deletions(-) > > diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c > index c88e596..bc8c922 100644 > --- a/drivers/net/mpc5xxx_fec.c > +++ b/drivers/net/mpc5xxx_fec.c > @@ -250,6 +250,13 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t > * bis) > mpc5xxx_fec_init_phy(dev, bis); > > /* > + * Call board-specific PHY fixups (if any) > + */ > +#ifdef CONFIG_RESET_PHY_R > + reset_phy(); > +#endif > + > + /* > * Initialize RxBD/TxBD rings > */ > mpc5xxx_fec_rbd_init(fec); Applied to net repo. Please accept my sincere apologies for taking so long to process.
regards, Ben _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
