On 2/2/21 2:01 PM, Adam Ford wrote:
On Tue, Feb 2, 2021 at 4:11 AM Biju Das <biju.das...@bp.renesas.com> wrote:
Hi Marek and Adam,
Subject: Re: [PATCH 1/5] arm: dts: r8a774a1: Import DTS queued for Linux
5.12-rc1
On 2/1/21 4:19 PM, Adam Ford wrote:
On Mon, Jan 25, 2021 at 6:40 AM Marek Vasut <ma...@denx.de> wrote:
On 1/25/21 12:22 AM, Adam Ford wrote:
On Sun, Jan 24, 2021 at 11:10 AM Marek Vasut <ma...@denx.de> wrote:
On 1/13/21 12:52 AM, Adam Ford wrote:
Update the RZ/G2M dtsi and r8a774a1-beacon-rzg2m-kit kit from
Renesas repo destined to become 5.12-rc1.
I picked a DT sync for Linux 5.10 from Biju (on CC), does your
board need something from 5.12-rc1 or can it be based on 5.10 too ?
I honestly don't remember. I had to unexpectedly leave town for
this week due to a funeral, and I won't be near a Linux development
computer to run tests until Feb 1, so I don't know if the board will
build using 5.10 or not. Sorry I don't have a better answer.
Lets revisit this later then.
I tested the Beacon boards, but they have a dependency on usb2_clksel
that is not present in the 5.10 device tree.
I also noticed that I forgot to include versaclock.h dt-binding file
from the kernel, so the Beacon boards don't build for that too.
Do we have usb2_clksel support in u-boot? If yes, it make sense to import from
5.12-rc1.
Similarly for other bits importing from kernel 5.12-rc1.
May be rpc-spcif support available in u-boot. So we could import from 5.12-rc1.
For others like PCIe, ethernet the changes corresponding to dts is not present
in driver.
I think Marek has posted some rcar3 updates to support the PCIe.
RCar3 PCIe was supported for a while (years?), what I posted recently
were NVMe fixes.
I
am hopeful that it will work on the RZ/G2 series.
I have rpc-spcif enabled and my plan was to post some updated configs
with it enabled once the updated configs had been merged.
RPC is drivers/mtd/renesas_rpc_hf.c and drivers/spi/renesas_rpc_spi.c ?
[...]
